Module No. 5697

Using Watch Operations to Adjust the Time and Day Settings

  1. Pull out the crown to the second click.

  2. This causes the second hand to move to 12 o’clock, and enables the hour and minute setting operation.

    5697_12_MobileLink_TA

    Each press of (A) cycles through available setting items in the sequence shown below.

    fl_Date_Time_seting_year-place
  3. Rotate the crown to change the hour and minute settings.

  4. While checking if the 24-hour hand is indicating a.m. (right side) or p.m. (left side), set the desired time.

  5. Press (A).

  6. This enables the year ten’s digit setting operation.

  7. Rotate the crown to move the second hand to the desired setting for the year ten’s digit.

  8. 5697_13_TA
  9. Press (A).

  10. This enables the year one’s digit setting operation.

  11. Rotate the crown to move the second hand to the desired setting for the year one’s digit.

  12. 5697_14_TA
  13. Press (A).

  14. This enables the month setting operation.

  15. Rotate the crown to change the month.

  16. 5697_15_TA
  17. Press (A).

  18. This causes the second hand to move to 12 o’clock, and enables the day setting operation. The function hand will move slightly at this time.

    The function hand will move repeatedly while the day setting is being changed.

  19. Rotate the crown to change the day.

  20. 5697_16_TA
  21. On a time signal at the top of a minute, push the crown back in.

Back

Next