Module No. 5692

1. Enter the Timekeeping Mode.

Navigating Between Modes

2. Hold down (A) for at least five seconds. Release the button when [H-S] stops flashing and [SEC 00] starts to flash.

This enables adjustment of second hand alignment.



3. If the second hand is not aligned with the 0 second position, use (B) and (D) to align it.

Holding down (B) or (D) moves the hand at high speed.

4. Press (C).

This enables adjustment of the hour and minute hands.

5. If the hour and minute hands are not at 12 o’clock, use (B) and (D) to align them.

6. Press (A) to complete the setting operation.