Module No. 5684
Resetting Watch Settings
This section explains how to return the watch settings below to their initial factory defaults.
Watch Settings
Reminder
Stopwatch
Timer
Alarm
-
Enter the Timekeeping Mode.
-
Hold down (A) for at least two seconds until the name of the currently selected Home City is displayed.
-
Press (C) twice.
-
Hold down (B) for at least seven seconds. This will cause the [ALL] and [RESET] indicators to alternate on the display. Release the button when only [RESET] is displayed.
-
Press (A) to exit the setting screen.
This is the setting mode. The hands automatically shift out of the way for easy viewing of the display and other indicators.
![5684_13_fl_MobileLink_comon](fig/5684_13_fl_MobileLink_comon_UQIDILsaanbruu.png)
This causes the seconds to flash.
![5684_49_Other](fig/5684_49_Other_UQIDILrdhxjhcr.png)
![5684_50_Other](fig/5684_50_Other_UQIDILimetcuix.png)
Note
While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.
Resetting the watch will also delete information for pairing the watch with a phone, and unpair them.