Module No. 5678

Checking the Current Temperature

  1. Enter the Temperature Mode.

  2. Entering the Temperature Mode will start temperature measurement and display the result.

    After you enter the Temperature Mode, the watch takes readings about every five seconds for three minutes. After that, a measurement is taken about every two minutes.

    To retrigger measurement, press (A).

    5678_63_TEMP

Note

If the hour and/or minute hand is located over the digital display when you perform a temperature measurement, the hands will temporarily shift to 4 o’clock or 8 o’clock to allow easier reading of measurement values. The hands will unshift to their normal positions after about three seconds.

The watch will automatically return to the Timekeeping Mode if you do not perform any operation in the Temperature Mode for about one hour.

The measuring range is -10.0 °C to 60.0 °C (14.0 °F to 140.0 °F) (0.1 °C (0.2 °F) units). [- - .-] will appear for the measured value if it is outside the allowable range.

To return to the Timekeeping Mode, hold down (B) for at least two seconds.

Back

Next