Module No. 5672

Setting the Countdown Start Time

The countdown start time can be set in 1-minute units up to 24 hours.

If a timer countdown operation is in progress, reset the timer to its current start time before performing this operation.

Using the Timer

  1. Enter the Timer Mode.

    2. Navigating Between Modes

  2. Loosen the crown and then pull it out to the first click.

  3. Rotate the crown to change the countdown start time setting.

    4. 5672_34_TR

  4. Push the crown back in and then lock it.

Note

To specify a countdown start time of 24 hours, align the small hour and minute hands with 12 o’clock, so the small 24-hour hand aligns with 24.

If you do not perform any operation for about two minutes after pulling out the crown, crown operations will automatically become disabled. If that happens, push the crown back in and then pull it out again.

Back

Next