Module No. 5671

Configuring the Summer Time Setting (World Time)

If you are in an area that observes summer time, you can also configure a summer time setting.

Note

The initial factory default summer time setting for all cities is [AT (AUTO)]. In many cases, the [AT (AUTO)] setting lets you use the watch without switching between summer time and standard time.

When performing a manual operation to select a time zone for which there is no city name displayed, use [STD] or [DST] for the summer time setting.

While [UTC] is selected as the city, you will not be able to change or check the summer time setting.

  1. Enter the World Time Mode.

    2. Navigating Between Modes

  2. Pull out the crown to the first click.

    3. The second hand will point to the currently selected World Time City (time zone).

  3. Press (B).

    4. The mode hand will move to the summer time setting of the currently selected World Time City (time zone).

  4. Rotate the crown to change the summer time setting.

    5. [AT (AUTO)]
    The watch switches between standard time and summer time automatically.

    [STD]
    The watch always indicates standard time.

    [DST]
    The watch always indicates summer time.

    5671_24_WT

  5. Push the crown back in to its normal position.

Back

Next