Module No. 5659

Setting the Countdown Start Time

The start time can be set in 1-second units up to 60 minutes.

If a timer countdown operation is in progress, reset the timer to its current start time before performing this operation.

  1. Enter the Timer Mode.

  2. Hold down (A) for at least two seconds. Release the button when the minutes setting starts to flash.

  3. This causes the minutes digits to flash.

    This is the setting mode. The hands automatically shift out of the way for easy viewing of the display and other indicators.

    5659_33_TMR
  4. Use (B) and (D) to change the minutes setting.

  5. Press (C).

  6. This causes the seconds digits to flash.

    5659_34_TMR
  7. Use (B) and (D) to change the seconds setting.

  8. Press (A) to exit the setting screen.

Note

Setting a start time of [00’00] will perform a countdown of 60 minutes.

Back

Next