Module No. 5639

Using Watch Operations to Adjust the Time and Day Settings

1.Pull out the crown to the second click.

This causes the second hand to move to 12 o’clock, and enables the hour and minute setting operation.

5639_08_TA
  • Each press of (A) cycles through available setting items in the sequence shown below.
fl_Date_Time_seting_Item

2.Rotate the crown to change the hour and minute settings.

  • While checking if the 24-hour hand is indicating a.m. (right side) or p.m. (left side), set the desired time.

3.Press (A).

This enables the year ten’s digit setting operation.

4.Rotate the crown to move the second hand to the desired setting for the year ten’s digit.

5639_09_TA

5.Press (A).

This enables the year one’s digit setting operation.

6.Rotate the crown to move the second hand to the desired setting for the year one’s digit.

5639_10_TA

7.Press (A).

This enables the month setting operation.

8.Rotate the crown to change the month.

5639_11_TA

9.Press (A).

This causes the second hand to move to 12 o’clock, and enables the day setting operation. The function hand will move slightly at this time.

  • The function hand will move repeatedly while the day setting is being changed.
Hand and Day Indicator Movement

10.Rotate the crown to change the day.

5639_12_TA

11.On a time signal at the top of a minute, push the crown back in.