Module No. 5455

Adjusting the Time and Day Setting

1.Pull out the crown to the second click.

The second hand will move to the currently selected time zone.

5455_34_ATDS

2.Hold down (C) for about 10 seconds.

This causes the second hand to move to 12 o’clock, and enables the minute setting operation.

3.Rotate the crown to change the minute setting.

4.Press (C).

The hour hand will move slightly, indicating that the hour setting operation is enabled.

5.Rotate the crown to change the hour setting.

6.Press (C).

This changes to the year setting operation.

5455_35_ATDS
5455_36_ATDS

7.Rotate the crown to move the hour hand to the desired setting for the year ten’s digit, and the minute hand to the desired one’s digit.

8.Press (C).

This enables the month setting operation.

5455_37_ATDS

9.Rotate the crown to change the month.

10.Press (C).

The mode hand will move slightly, indicating that the day setting operation is enabled.

5455_38_ATDS

11.Rotate the crown to change the day.

12.On a time signal at the top of a minute, push the crown back in.