Module No. 3569

Turning Off an Alarm or the Hourly Time Signal

To stop an alarm or the hourly time signal from sounding, perform the steps below to turn it off.

To have an alarm or hourly time signal sound again, turn it back on.

Note

Indicators are displayed while any of the alarms or the hourly time signal is turned on.

The applicable indicators are not displayed while all of the alarms are turned off and/or the hourly time signal is turned off.

3569_23_AL

  1. Enter the Alarm Mode.

    2. Navigating Between Modes

  2. Use (D) to scroll through the alarm ([1] to [5]) and hourly time signal ([:00]) screens until the one you want to turn off is displayed.

    3. 3569_24_AL

  3. Press (A) to turn off the displayed alarm or the hourly time signal.

    4. Each press of (A) cycles through the alarm settings as shown below.

    3569_32_fl_AL

    Each press of (A) toggles the hourly time signal between enabled and disabled.

    Turning off all alarms will cause [ALM] (alarm) to disappear from the display, while disabling the hourly time signal causes [SIG] (hourly time signal) to disappear from the display.

    3569_25_AL

Note

If [ALM] (alarm) is still displayed, it means that another alarm is still turned on. To turn off all of the alarms, repeat steps 2 and 3 until the [ALM] (alarm) indicator is no longer displayed.

Back

Next