Module No. 3569

Setting the World Time City

Use the procedure in this section to select a World Time city. If you are in an area that observes summer time, you can also configure a summer time setting.

  1. Enter the World Time Mode.

    2. Navigating Between Modes

  2. Use (B) and (D) to display the city you want to specify as a World Time City.

    3. Holding down (B) or (D) scrolls through settings at high speed.

    For information about city codes, see the information below.

    City Table
    3569_13_WT

  3. If you want to configure the summer time setting, hold down (A) for at least two seconds.

    4. [DST] is displayed along with summer time.

    Each time you hold down (A) for at least two seconds, the setting toggles between standard time and summer time.

    3569_14_WT

Note

While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.

The summer time setting you configure is applied to the currently selected city only. It does not affect other cities.

Back

Next