Module No. 3568
Enabling Auto Lap Timing
While Auto Lap Timing is enabled, each time you run the distance you specified with G-SHOCK MOVE the lap time will be recorded automatically.
-
Enter the Timekeeping Mode.
-
Press (B).
-
Hold down (A) for at least two seconds.
-
Use (A) and (C) to move the pointer to [AUTO LAP].
-
Press (B).
-
Use (A) and (C) to move the pointer to [ON] (enabled) or [OFF] (disabled).
-
Press (B) to complete the setting operation.
-
Press (D) to exit the setting screen.
This displays the Training Mode screen.
This displays the Training Mode setting screen.
![3568_set_TR_caps](fig/3568_set_TR_caps_NHCXILwvxiqqdd.png)
After the setting operation is complete, [SETTING COMPLETED] will appear for a few seconds, and then the Training Mode setting screen will re-appear.
Note
The watch exits the setting operation automatically after about two or three minutes of non-operation.
You can also use G-SHOCK MOVE to enable or disable Auto Lap Timing.