Module No. 3567

Indicators

3567_02_Intro

  1. Indicates power saving is enabled.

  2. Displayed while the watch is in the Recall Mode.

  3. Graphic display area operation is linked with operations in each mode.

  4. Displayed while there is a Bluetooth connection between the watch and a phone.

  5. Displayed while a split time is displayed.

  6. Displayed while a lap time is displayed.

  7. Displayed during p.m. times while 12-hour timekeeping is being used.

  8. Indicates the current step count status.

  9. Displayed while the hourly time signal is enabled.

  10. Displayed while an alarm is turned on.

  11. Displayed while the button operation tone is disabled.

  12. Displayed while the current time is a summer time (DST).

  13. Displayed while the step count is displayed.

  14. In the Stopwatch Mode, indicates the measurement status while the Target Time function is enabled.

  15. Displayed while Auto Light is enabled.

Battery Replacement

When battery power goes low, icon_dot_batt will start to flash and some functions will become disabled. If icon_dot_batt continues to flash, replace the battery.

Request battery replacement from a CASIO service center or your original retailer.

3567_03_BATT_Intro

If [R] is flashing on the display

If [R] is flashing, it means that all functions, except for timekeeping, are disabled due to high momentary battery power consumption.

[R] is flashing on the display.
3567_04_BATT_Intro

Back

Next