Module No. 3559

Checking the Tide Level and Moon Age for a Specific Date and Time

You can use the procedures in this section to look up the tide level (Tide Graph) and Moon age for a date or time you specify.

  1. Enter the Tide/Moon Mode.

  2. Entering the Tide/Moon Mode displays a Tide Search screen or Moon Search screen.

  3. Press (A) to toggle between Tide Search and Moon Search.

  4. 3559_20_fl_TideMoon

    The screen (Tide Search or Moon Search) that appears first will be the one that was displayed the last time you exited the Tide/Moon Mode.

    The initial setting of Tide Search is 6:00 a.m.

To check the Tide Graph at the top of each hour of the current day

  1. Enter the Tide/Moon Mode.

  2. Press (A) to display the Tide Search screen.

  3. Use (D) to select the time whose Tide Graph you want to view.

  4. Each press of (D) advances the time by one hour.

    Holding down (D) scrolls through settings at high speed.

    3559_21_TideMoon

To scroll the day and check information

  1. Enter the Tide/Moon Mode.

  2. Press (A) to display the Moon Search screen.

  3. Use (D) to select the day whose Moon age you want to view.

  4. Each press of (D) advances by one day.

    Holding down (D) scrolls through settings at high speed.

    3559_22_TideMoon
  5. Press (A) to display the Tide Search screen.

  6. Use (D) to select the time whose Tide Graph you want to view.

  7. Each press of (D) advances the time by one hour.

    Holding down (D) scrolls through settings at high speed.

    3559_23_TideMoon

To check information for a specific date

  1. Enter the Tide/Moon Mode.

  2. Hold down (A) for at least one second.

  3. This causes the current year setting to flash on the display.

    3559_24_TideMoon
  4. Use (C) to display the setting you want to change.

  5. Each press of (C) cycles through settings in the sequence shown below.

    fl_Date_Time_seting_Item_11
  6. Use (B) and (D) to change the selected setting.

  7. Holding down (B) or (D) scrolls through settings at high speed.

  8. Repeat steps 3 and 4 to specify the date.

  9. Press (A) to complete the setting operation.

Note

While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.

Back

Next