Module No. 3559

Setting the World Time City

Use the procedure in this section to select a World Time city. If you are in an area that observes summer time, you can also configure a summer time setting.

  1. Enter the World Time Mode.

  2. Press (D) to display the city code of the currently selected city.

  3. Holding down (D) scrolls through settings at high speed.

    For information about city codes, see the information below.

    3559_09_WT
  4. If you want to configure the summer time setting, hold down (A) for at least one second.

  5. [DST] is displayed along with summer time.

    Each time you hold down (A) for at least one second, the setting will toggle between standard time and summer time.

    3559_10_WT

Note

While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.

The summer time setting you configure is applied to the currently selected city only. It does not affect other cities.

Back

Next