Module No. 3531

Assigning a Title and Date

  1. Enter the Day Counter Mode.

    2. Navigating Between Modes

  2. Use (B) and (D) to select the Day Counter record you want to configure.

  3. Hold down (A) for at least one second.

    4. The first character of the record’s title will flash.

    3531_25_DC

  4. Use (B) and (D) to display the character you want to input.

    5. Holding down (B) or (D) scrolls through settings at high speed.

  5. Press (C).

    6. This causes the flashing to move to the right.

    From the eighth character of the title, the flashing cursor moves to the year, then the month, then the day.

  6. Repeat steps 4 and 5 to configure other title and date settings if you want.

    7. Note

    You can enter up to 8 characters for the title. Allowable input characters for the title are: spaces, alpha characters (A to Z), symbols (., -), and numbers (0 to 9).

    The input range for the year setting is 1950 to 2049.

  7. Press (A) to complete the setting operation.

Note

While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.

Back

Next