Module No. 3522
Setting the World Time City
Use the procedure in this section to select a World Time city. If you are in an area that observes summer time, you can also configure a summer time setting.
-
Enter the World Time Mode.
-
Press (D) to display the city code of the currently selected city.
-
If you want to configure the summer time setting, hold down (A) for at least one second.
Holding down (D) scrolls through settings at high speed.
For information about city codes, see the information below.
![3522_09_WT](fig/3522_09_WT_VPCVILyvkwcywi.png)
[DST] is displayed along with summer time.
Each time you hold down (A) for at least one second, the setting will toggle between standard time and summer time.
![3522_10_WT](fig/3522_10_WT_VPCVILfsvyuazk.png)
Note
While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.
The summer time setting you configure is applied to the currently selected city only. It does not affect other cities.