Module No. 3513

Specifying a World Time City

Use the procedure in this section to select a World Time city. If you are in an area that observes summer time, you can also enable or disable summer time.

  1. Enter the World Time Mode.

  2. Use (A) and (C) to display the city you want to specify as a World Time City.

  3. Holding down (A) or (C) scrolls through settings at high speed.

  4. To change the summer time setting, hold down (E) for about two seconds.

  5. This causes [DST] [Hold] [On] or [DST] [Hold] [OFF] to flash on the display. After that, the setting is changed.

    [DST] [Hold] [On] flashing on the display indicates summer time.

    [DST] [Hold] [OFF] flashing on the display indicates standard time.

    [DST] is displayed while summer time is selected.



While [UTC] is selected as the city, you will not be able to change or check the summer time setting.

The summer time setting you configure is applied to the currently selected city only. It does not affect other cities.