Module No. 3501
World Time City Setting
You can specify up to five cities as your World Time favorites. If you are in an area that observes summer time, you can also enable or disable summer time.
Note
The initial factory default summer time setting for all cities is [AUTO]. In many cases, the [AUTO] setting lets you use the watch without switching between summer time and standard time.
-
Enter the World Time Mode.
-
Use (D) to display the World Time number whose setting you want to configure.
-
Hold down (A) for at least two seconds.
-
Use (B) and (D) to display the city you want to specify as a World Time City.
-
If you want to change the summer time setting, press (C).
-
Use (D) to select a summer time setting.
-
Press (A) to complete the setting operation.
![3501_20_WT](fig/3501_20_WT_VPCVILjhhirmxa.png)
This causes [WT] to flash on the display.
![3501_21_WT](fig/3501_21_WT_VPCVILhjmugdvj.png)
Holding down (B) or (D) scrolls through settings at high speed.
[AUTO]
The watch switches between standard time and summer time automatically.
[OFF]
The watch always indicates standard time.
[ON]
The watch always indicates summer time.
![3501_22_WT](fig/3501_22_WT_VPCVILabfakwkf.png)
Note
While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.
While [UTC] is selected as the city, you will not be able to change or check the summer time setting.
If you select a World Time City with the CASIO WATCHES phone app and then change to a different city with a watch operation, the CASIO WATCHES city information is deleted from the watch.