Module No. 3501

Resetting Watch Settings

This section explains how to return the watch settings below to their initial factory defaults.

Watch Settings

Reminder

Stopwatch

Timer

Alarm

  1. Enter the Timekeeping Mode.

    2. Navigating Between Modes

  2. Hold down (A) for at least two seconds. Release the button when the name of the currently selected Home City appears on the display.

    3. 3501_RCVD_fl_HT_SET_comon

  3. Press (C) twice.

    4. This causes the seconds to flash.

    3501_45_Other

  4. Hold down (B) for at least seven seconds. Release the button when [ALL] stops flashing.

    5. 3501_46_Other

Note

While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.

Resetting the watch will also delete information for pairing the watch with a phone, and unpair them.

Back

Next