Module No. 3496
Enabling the Button Operation Tone
Use the procedure below to enable or disable the tone that sounds when you press a button.
-
Enter the Timekeeping Mode.
-
Hold down (A) for at least two seconds. Release the button when the name of the currently selected Home City appears on the display.
-
Press (C) 11 times.
-
Use (D) to select [KEY♪] or [MUTE].
-
Press (A) to exit the setting screen.
![3495_fl_SET_HT_caps](fig/3495_fl_SET_HT_caps_UQIDILcgcnfapj.png)
This causes [KEY♪] or [MUTE] to flash on the display.
![3496_34_other](fig/3496_34_other_UQIDILsirarnjf.png)
[KEY♪]: Operation tone enabled.
[MUTE]: Operation tone muted.
![3496_35_other](fig/3496_35_other_UQIDILqqnkcdwb.png)
Note
While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.
Note that alarm and timer tones will still sound even while the operation tone is muted.