Module No. 3495
Configuring Power Saving Function Settings
-
Enter the Timekeeping Mode.
-
Hold down (A) for at least two seconds. Release the button when the name of the currently selected Home City appears on the display.
-
Press (C) 14 times.
-
Press (D) to toggle between ON and OFF.
-
Press (A) to exit the setting screen.
This displays [POWER SAVING].
[On]: Power Saving enabled.
[OFF]: Power Saving disabled.
Note
While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.
For details about Power Saving, refer to the information below.