Module No. 3493

World Time City Setting

You can specify up to five cities as your World Time favorites. If you are in an area that observes summer time, you can also enable or disable summer time.

  1. Enter the World Time Mode.

    2. Navigating Between Modes

  2. Use (D) to display the World Time number whose setting you want to configure.

    3. 3493_15_WT

  3. Hold down (A) for at least two seconds.

    4. This causes [WT] to flash on the display.

    3493_16_WT

  4. Use (B) and (D) to display the city you want to specify as a World Time City.

    5. Holding down (B) or (D) scrolls through settings at high speed.

  5. If you want to change the summer time setting, press (C).

  6. Use (D) to select a summer time setting.

    7. [OFF]
    The watch always indicates standard time.

    [ON]
    The watch always indicates summer time.

    3493_17_WT

  7. Press (A) to complete the setting operation.

Note

While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.

While [UTC] is selected as the city, you will not be able to change or check the summer time setting.

The summer time setting you configure is applied to the currently selected city only. It does not affect other cities.

Back

Next