BLUETOOTH WATCH

HELP

GB-5600AA/AB
User's Guide for Mobile Link Functions (for GALAXY)

Displaying Mobile Link Information

The Mobile Link information listed below can be checked by displaying it on the watch.

  • Watch Bluetooth device name
  • Watch Bluetooth device address
  • Phone enabled services (usable Bluetooth services)

This information can be displayed in the watch's Setup Mode.

You also can perform the watch pairing information clear operation in the Setup Mode.

To display Mobile Link information

1.
In the Timekeeping Mode, press C five times.
  • This enters the Setup Mode. This displays the Bluetooth Device Name Screen shown below.

    Bluetooth Device Name Screen

    (The message “GB-5600A*” will scroll from right to left.)

  • If you do not perform any operation for about two or three minutes while in the Setup Mode, the watch will automatically return to the Timekeeping Mode.
2.
Each press of D cycles between screens as shown below.
Bluetooth Device Name Screen
Bluetooth Device Address Screen

Enabled Services Screen
  • The values on the Enabled Services Screen indicate the Bluetooth services that are available for use by the phone. For more details, see "Phone Enabled Services".
  • You can go to the watch Alert Operation Setting Screen from any of the above screens. For more information, see "Configuring Watch Alert Operation Settings".
3.
Press C to return to the Timekeeping Mode.

Phone Enabled Services

The Enabled Services Screen shows numbers that identify Bluetooth services enabled for the phone that is currently connected to the watch. On the example display below, the numbers 1, 2, 4, and 5 indicate enabled Bluetooth services.

Enabled Services Screen

Each of the values on the Enabled Services Screen corresponds to a Bluetooth service.
Number Bluetooth Service Related Mobile Link Function
1 Time Adjusting the Watch's Current Time to the Phone's Time
2 Local Time Information (UTC Offset and DST information)
3 Phone Alert Status Incoming Call Notification
Using Phone Finder
4 Alert Notification Alert Notification (Incoming Call, Incoming Mail, and Other Phone Events)
5 Find Me Using Phone Finder
To check the connection from the phone

To clear the watch's pairing information

1.
If the Bluetooth icon () is displayed on the watch, perform one of the operations below to clear it. If the Bluetooth icon is not displayed on the watch, go directly to step 2 of this procedure.
2.
In the Timekeeping Mode, press C five times.
  • This enters the Setup Mode. This displays the Bluetooth Device Name Screen shown below.

    Bluetooth Device Name Screen

    (The message “GB-5600A*” will scroll from right to left.)

3.
Hold down D for about two seconds.
  • The message "NOT YET PAIRED!" will scroll from right to left on the display after pairing information is cleared.