BLUETOOTH WATCH

Support

G-SHOCK+ Ver 2.0 Setup GuideGB-6900B/GB-X6900B/GB-5600B × GALAXY

* An Android OS 4.4.2 is used for explanations in this guide.

Pairing with Multiple watches

  1. 1Disable Bluetooth on the watch currently connected with the phone.

    In the Timekeeping Mode, hold down the upper right button for about two seconds until the Bluetooth icon disappears from the display.

  2. 2On the notification panel, Tap [Bluetooth] to toggle it from off to on.

    Enabling Bluetooth will cause the phone to start scanning for Bluetooth devices. Cancel the scan.

  3. 3Start up the G-SHOCK+ app. Tap in the upper right corner of the phone display, and then tap [Connect new watch].

    * If the top menu does not appear, tap in the upper left corner of the display.

  1. 4Select the watch model name you want pair with, and tap [Next].

  2. 5Enable Bluetooth on the new watch you want to pair with.

    In the Timekeeping Mode, hold down the watch’s upper right button for about two seconds until the Bluetooth indicator appears on the display.

  3. 6The watch will vibrate and the Bluetooth icon will appear to indicate a connection has been established.

    * Once complete, the pairing operation does not need to be performed again to connect. * If the message "Failed to connect. G-SHOCK+ is requesting permission to reset Bluetooth. Allow?" appears, tap [OK] and then go back to step 3.

When pairing is not successful:

The watch returns to the Timekeeping Mode with the Bluetooth icon not displayed. In this case display the top of the G-SHOCK+ app, and then perform the above steps again starting from step 2.

Note
If you are unable to pair the watch with the phone successfully, it may be due to one of the reasons below.

  • The phone is outside of the watch's allowable communication range.
  • The phone is turned off.