Module No. 5678

Viewing Recorded Data

  1. Enter the Altitude Record Recall Mode.

  2. This displays a record of data recorded in the Altimeter Mode.

  3. Use (A) and (C) to display the data you want to view.

  4. Holding down (A) or (C) scrolls at high speed.

    5678_66_fl_REC

    Each press of a button scrolls to the top screen of the next manually recorded data record, numbered from 1 ([-01-]) to a maximum of 30 ([-30-]).

Note

If there is no data left in memory due to a data delete operation, error, or some other reason, [- - - -] or [0] will appear on the display.

If the cumulative ascent (ASC) or cumulative descent (DSC) value exceeds 99,999 m (327,995 feet), it will revert to 0 and continue from there.

Pressing (D) returns to the top screen (record number, DSC, ASC, MAX, or MIN) of the data that you are viewing.

If you do not perform any operation for about three minutes while in the Altitude Record Recall Mode, the watch automatically returns to the Timekeeping Mode.

Manually Recorded Data

After displaying the top screen of a manually recorded data record (01 through 30), the record’s data screens appear in sequence as shown below.

Example: Manually recorded Record 01

5660_67_fl_REC

Auto Recorded Data

After displaying an auto recorded data record, you can navigate between the record’s data screens as shown below.

High altitude and low altitude

Example: High altitude

5660_68-1_fl_REC

Cumulative ascent and cumulative descent

Example: Cumulative ascent

5660_68-2_fl_REC

Back

Next