[Firmware Update] EX-FR100, EX-FR100CA - Version 2.50

Mar. 2017

Supported Models

EX-FR100, EX-FR100CA

Improvements Provided by This Update

V2.10  >>  V2.50
Camera: V2.10  >>  V2.50
Controller: V3.00  >>  L Controller V1.00
Adds a Enhanced Leg Length (Long Legs) function
Adds a Make-up Art Mode
Improves snapshot display zoom (2X -> 4X)
 
NOTE
• EXILIM Connect version must also be updated.
• This version does not support Multi Camera Mode shooting.
  To use the Multi Camera Mode, you need to install Ver2.10. (Camera: Ver2.10, Controller: Ver3.00)
• This version does not support connection with the Smart Outdoor Watch.
  To connect with the Smart Outdoor Watch, you need to install Ver2.10. (Camera: Ver2.10, Controller: Ver3.00)
 
  Click here to install Ver2.10.
 
V2.01  >>  V2.10
Camera: V2.01  >>  V2.10
Controller: V2.00  >>  V3.00
Improves operation from the EXILIM Connect app for smartphones and tablets.
 
NOTE
• With the EX-FR100 camera, both the camera and controller firmware need to be updated.
  If the controller is running version 1.10 or lower, you will need to perform two firmware updates.
• With the EX-FR100CA camera, just the camera firmware needs to be updated.
• EXILIM Connect version must also be updated.
 
V1.10  >>  V2.01
Camera: V1.10  >>  V2.01
Controller: V1.10  >>  V2.00
Added Multi Camera function
Added capability to configure settings from EXILIM Connect smartphone/tablet terminal app
Changed the initial date and time settings
 
Click here for information about EXILIM Connect.
 
NOTE
• Both the camera and controller need to be updated to the latest firmware version.
  If the controller is running version 1.10 or lower, you will need to perform two firmware updates.
  It is also recommended that the firmware of an EX-FR100CA camera be updated to V2.01 or higher.
• EXILIM Connect version must also be updated.
• Updating changes the current date and time setting.
  After updating, configure the current date and time settings using EXILIM Connect or the controller.
 
V1.00  >>  V1.10
Camera: V1.00  >>  V1.10
Controller: V1.00  >>  V1.10
Adds function for connecting with the CASIO WSD-F10 Smart Outdoor Watch.
* Markets where the CASIO WSD-F10 Smart Outdoor Watch is available will be expanded in the future.
 
Click here for information about the CASIO WSD-F10 Smart Outdoor Watch.
 
Click here for information about how to connect with the CASIO WSD-F10 Smart Outdoor Watch.
 
Click here for the CASIO WSD-F10 Smart Outdoor Watch FAQ.
 
NOTE
• Both the camera and controller need to be updated to the latest firmware version.
 

Applicable Users

EX-FR100 or EX-FR100CA owners whose camera is still running Version 1.00, Version 1.10, Version 2.00, Version 2.01 or Version 2.10 firmware.

To check your firmware version

To check your current EX-FR100 camera version
Turn on the camera and controller. Turning on power causes the camera and controller operation lamps to light green, and automatically starts an operation to establish a Bluetooth wireless technology connection between them.
Next, use the controller to perform the operation below.
Operation:  Show Icons -> MENU -> Setup -> Version
 
To check your current EX-FR100CA camera version
1.  Establish a wireless connection between the camera and smartphone.
2. On the smartphone, run EXILIM Connect and then tap "Settings".
3. Tap "Camera Setup".
4. Tap "Version".
This will display the camera's current firmware version on the smartphone.
   
If "Ver.1.00", "Ver.1.10", "Ver.2.00", "Ver.2.01", "Ver.2.10" is displayed for the camera version or "Ver.1.00", "Ver.1.10", "Ver.2.00", "Ver.2.01", "Ver.3.00" is displayed for the controller version, download this version update and install it on your camera.

Requirements for Installing This Update on Your Camera


To install this firmware update on your camera, you must copy it into the root directory (the top directory on the drive) of a memory card. Because of this, you need to have the USB cable (that comes bundled with the camera) on hand or a card slot available on your computer.

User License Agreement Covering Update Software Download

* In order to download and use the update software, you must first read and agree to be bound by the terms and conditions of the End User Software Licensing Agreement (Agreement) below.
* If, after carefully reading the Agreement, you agree to be bound by its terms and conditions, click the [I agree] button to advance to the download procedure.
* Regardless of whether or not you actually do agree, by downloading this update software, you indicate your agreement to be bound the terms and conditions of the Agreement and establish a contractual agreement between you and CASIO COMPUTER CO., LTD. (CASIO).
* If you do not agree with the terms and conditions of the Agreement, click [I do not agree] and do not download the update software.
End User Software Licensing Agreement
CASIO COMPUTER CO., LTD.
1 License
CASIO, as the owner of this Software and other intellectual asset rights, grants you the following non-exclusive, non-transferrable, copyright license subject to the terms of this Agreement.
1) You may install and use this Software on your CASIO EX-FR100 or EX-FR100CA Digital Camera.
2) You may make one copy of this Software on a memory card for the purpose of installing the software on your EX-FR100 or EX-FR100CA Digital Camera.
2 Prohibitions
1) Except as permitted by this Agreement, you may not copy this Software either in part or its entirety.
2) You may not modify, alter, adapt, reverse engineer, disassemble, decompile or otherwise attempt to derive the source code of the Software.
3) You may not resell, rend, lease, loan, or distribute this Software, or place the Software on a server or make it accessible by means of a network.
4) You may not sublicense or transfer this Software to a third party.
5) You may not use this Software for any unlawful purpose, or in any manner inconsistent with this Agreement.
3 Period of Agreement
1) This Agreement becomes binding as soon as you download the Software.
2) This Agreement becomes null and void when you destroy all of your copies of this Software.
3) CASIO may terminate this license at any time if you are in breach of the terms of this Agreement. Upon termination, you will immediately destroy the all of your copies of this Software.
4 Limitation of Liability
1) This Software is provided "as is," and CASIO makes no express warranty concerning the Software's ability to operate properly or to be free of defects, or concerning the correction of defects in the future, or the suitability of the Software functions for any particular purpose.
2) In no event shall CASIO be liable for any damages whatsoever (including, without limitation, damages for loss of profits, business interruption, loss of information) arising out of the use of or inability to use this software, even if CASIO has been adviced of the possibility of such damages.
5 Other
1) Items not covered by the Agreement or items that require further negotiation shall be settled by mutual agreement between you and CASIO.
2) Any claim arising under or relating to this Agreement shall be governed by the laws of Japan.
3) Any dispute arising under or relating to this Agreement shall come under the jurisdiction of the Tokyo District Court.
* Windows is a registered trademark of Microsoft Corporation.
* Macintosh is a registered trademark of Apple Inc.
* Other company and product(serial) names used herein may also be trademarks or registered trademarks of others.