Wireless Functions
- Q2
- Can I select a particular image in camera memory and send it to a smartphone?
(Send Selected Image) - A2
- Yes. You can select one more snapshot and/or movie*1 file in camera memory and send it to a smartphone. You can select up to 100 files, totaling no more than 500MB for a single send.
After sending a snapshot to a smartphone, you can then upload it to a social networking service.
*1 Some smartphone models may not be able to play back movie files.
*2 Make sure that the battery is charged sufficiently.
*3 Make sure there is enough free space in the destination memory.
*4 After sending, perform the required operation on the destination device to ensure that the send was successful.
*5 Before deleting the image on the source device, check to make sure that it is stored properly on the destination device.
Procedure
1. On the camera, Press [MENU].
“REC MENU tab” or “PLAY MENU tab” Wireless Mode.
This will display the wireless mode screen.
2. On the camera, use the <up>, <down>, <left>, and <right> keys to select “Send to phone” and then press [SET].
3. On the camera, use the <up> and <down> keys to select “Send Selected Image” and then press [SET].
4. On the camera, move the red selection boundary to the image you want to send to the smartphone and then press [SET].
Selecting an image causes a check mark to appear in its check box.
5. After selecting all of the images you want to send to the smartphone, press [MENU].
6. On your smartphone, start up the EXILIM Connect app.
This will establish a connection between your camera and the smartphone, and send the files to the smartphone.
• If the message "Connect your phone to the access point below." remains on the camera's monitor screen, change the smartphone's Wi-Fi settings so your camera is selected for connection.
7. After image send is complete, perform one of the operations described below on the smartphone.
Share Album in Scene app: You can use the Scene app on the smartphone to send images from the camera to a smartphone.
Preview photo in Scene app: You can use the Scene app on the smartphone to view the images received from the camera.
Send to SNS: Displays a screen for sending images to a social networking site.
Cancel: Exits the operation.
* The Scene app is an image management app by ripplex inc. It makes it possible to display images at high speed and to share albums with friends.
• For information about the Scene app, contact ripplex inc.
• To use the scene recall function, you need to have the Scene app installed on your phone/terminal.
If your phone/terminal does not have the Scene app installed, it will display a message prompting you to do so.
• The Share Album functions of both iPhone and Android to not support movies.
- On an iPhone, movies sent from EXILIM Connect are placed in Cameral Roll, so they are included among the Scene app photos.
- On an Android terminal, movies sent from EXILIM Connect are placed in a folder in internal storage named EXILIM Connect, so they do not appear among the Scene app photos.
NOTE
• To use any of these functions, you need to install the EXILIM Connect app on your smartphone.
• You can specify the size of the image sent to the smartphone using "Resize before send".3M Images are converted to 3M size before being sent.
• If an original image is 3M size or smaller, it is sent without resizing.
• If an original image size is 3:2 or 16:9, its aspect ratio becomes 4:3.Original (Off) Images are sent in the pixels size they were originally recorded.
• You can use the smartphone apps below to view snapshots after sending them.
- iPhone: Camera Roll
- Android terminal: Gallery or another photo browser app
• Simultaneous send to multiple smartphones is not supported.
• Simultaneous send to the same smartphone by multiple cameras is not supported.