Using Point Navigation

You can use Point Navigation to have the direction and distance to a destination displayed on the map. In addition to being available with the Point Navigation app, this capability can also be used with the Location Memory app and the Activity app.

WD-F30_015

Point Navigation Basics

To do this:

Perform this operation:

Start navigation

1.

Use one of the operations below to start up Point Navigation.

  • On the app menu, tap “Point Navigation”.
  • While a map is displayed in the Location Memory app, swipe the touch screen from bottom to top and then tap “Point Navigation”.
  • While the Activity app “START” screen*1 is displayed, swipe the touch screen from bottom to top and then tap “Point Navigation”.
2.

Tap “Specify Destination”.*2*3

3.

Position your destination so it is aligned with the cross mark in the center of the displayed map, and then tap “Destination”.

4.

To start navigation, tap “START”.

*1 This operation can be performed from the Trekking, Fishing, Cycling, or Paddle “START” screen.

*2 If you started the operation from the Activity app, you can set the start point of the activity as the navigation destination by tapping “Back to Start Point” here.

*3 If you used Point Navigation to specify a destination in the past, you can also tap “Destination History” and then select a destination from the list of past destinations that appears. History will show up to the last 10 entries only.

To do this:

Perform this operation:

Change the destination during a navigation operation

1.

Perform step 1 of “Start navigation”.

  • This will display the message “Navigation being performed.”.
2.

Scroll the message downwards, and then tap “Reset Destination”.

3.

On the confirmation message screen that appears, tap “Stop”.

4.

Perform the “Start navigation” procedure from step 2.

Stop a navigation operation

1.

Perform step 1 of “Start navigation”.

  • This will display the message “Navigation being performed.”.
2.

Scroll the message downwards, and then tap “Stop Navigation”.

3.

On the confirmation message screen that appears, tap “Stop”.

Reaching Your Destination During a Navigation Operation

When you arrive in the vicinity (within approximately 80 meters) of your destination while a Point Navigation map is displayed, a notification message will appear on the display. To stop the navigation operation tap “Stop”. To resume it, tap “Resume”.