Time Adjustment is completed

Correct the hand home position

1.Hold down the upper left button for approximately 5 seconds until “H.SET” is displayed on the digital display.

After holding down the button for approximately 2 seconds “ADJ” will appear, but continue to hold down the button.

When the button is released while “H.SET” is displayed, “00” will flash on the upper display and the second hand will automatically move, so please wait until the hand has stopped.

2.If the second hand stops at any point other than 12 o’clock, use the lower right button (forward) and the upper right button (back) to align it with 12 o’clock.

Each press of the lower right button will advance the hand one step, and each press of the upper right button will go backward one step.

Holding down the button will quickly advance the hand, and pressing any button will make it stop.

3.Pressing the lower left button will switch to adjusting the hour and minute hands.

The hour and minute hands will move automatically, so please wait until the hands have stopped.

4.If the hour and minute hands stop at any point other than 12 o’clock, use the lower right button (forward) and the upper right button (back) to align them with 12 o’clock.

Each press of the lower right button will advance the hand one step, and each press of the upper right button will go backward one step.

The hour and minute hands will move at the same time.

Holding down the button will quickly advance the hands, and pressing any button will make them stop.

[Tip for adjusting the hands]

When advancing the hands, quickly pause them momentarily when they are near to 12 o’clock, and then set the hands to 12 o’clock using small increments.

5.Pressing the lower left button will switch to adjusting the mode dial hand.

The mode dial hand will move automatically, so please wait until the hand has stopped.

6.If the mode dial hand stops at any point other than 12 o’clock, use the lower right button (forward) and the upper right button (back) to align it with 12 o’clock.

Each press of the lower right button will advance the hand one step, and each press of the upper right button will go backward one step.

Holding down the button will quickly advance the hand, and pressing any button will make it stop.

7.Press the upper left button to complete the configuration.

Return to Timekeeping Mode, then the hands will advance to the current time and start to move.

Time Adjustment is completed

Time Adjustment is completed

Correct the hand home position

1.Hold down the upper left button for approximately 5 seconds until “H.SET” is displayed on the digital display.

After holding down the button for approximately 2 seconds “ADJ” will appear, but continue to hold down the button.

When the button is released while “H.SET” is displayed, “00” will flash on the upper display and the second hand will automatically move, so please wait until the hand has stopped.

2.If the second hand stops at any point other than 12 o’clock, use the lower right button (forward) and the upper right button (back) to align it with 12 o’clock.

Each press of the lower right button will advance the hand one step, and each press of the upper right button will go backward one step.

Holding down the button will quickly advance the hand, and pressing any button will make it stop.

3.Pressing the lower left button will switch to adjusting the hour and minute hands.

The hour and minute hands will move automatically, so please wait until the hands have stopped.

4.If the hour and minute hands stop at any point other than 12 o’clock, use the lower right button (forward) and the upper right button (back) to align them with 12 o’clock.

Each press of the lower right button will advance the hand one step, and each press of the upper right button will go backward one step.

The hour and minute hands will move at the same time.

Holding down the button will quickly advance the hands, and pressing any button will make them stop.

[Tip for adjusting the hands]

When advancing the hands, quickly pause them momentarily when they are near to 12 o’clock, and then set the hands to 12 o’clock using small increments.

5.Pressing the lower left button will switch to adjusting the mode dial hand.

The mode dial hand will move automatically, so please wait until the hand has stopped.

6.If the mode dial hand stops at any point other than 12 o’clock, use the lower right button (forward) and the upper right button (back) to align it with 12 o’clock.

Each press of the lower right button will advance the hand one step, and each press of the upper right button will go backward one step.

Holding down the button will quickly advance the hand, and pressing any button will make it stop.

7.Press the upper left button to complete the configuration.

Return to Timekeeping Mode, then the hands will advance to the current time and start to move.

Time Adjustment is completed

Time Adjustment is completed

Correct the hand home position

1.Hold down the upper left button for approximately 5 seconds until “H.SET” is displayed on the digital display.

After holding down the button for approximately 2 seconds “ADJ” will appear, but continue to hold down the button.

When the button is released while “H.SET” is displayed, “00” will flash on the upper display and the second hand will automatically move, so please wait until the hand has stopped.

2.If the second hand stops at any point other than 12 o’clock, use the lower right button (forward) and the upper right button (back) to align it with 12 o’clock.

Each press of the lower right button will advance the hand one step, and each press of the upper right button will go backward one step.

Holding down the button will quickly advance the hand, and pressing any button will make it stop.

3.Pressing the lower left button will switch to adjusting the hour and minute hands.

The hour and minute hands will move automatically, so please wait until the hands have stopped.

4.If the hour and minute hands stop at any point other than 12 o’clock, use the lower right button (forward) and the upper right button (back) to align them with 12 o’clock.

Each press of the lower right button will advance the hand one step, and each press of the upper right button will go backward one step.

The hour and minute hands will move at the same time.

Holding down the button will quickly advance the hands, and pressing any button will make them stop.

[Tip for adjusting the hands]

When advancing the hands, quickly pause them momentarily when they are near to 12 o’clock, and then set the hands to 12 o’clock using small increments.

5.Pressing the lower left button will switch to adjusting the mode dial hand.

The mode dial hand will move automatically, so please wait until the hand has stopped.

6.If the mode dial hand stops at any point other than 12 o’clock, use the lower right button (forward) and the upper right button (back) to align it with 12 o’clock.

Each press of the lower right button will advance the hand one step, and each press of the upper right button will go backward one step.

Holding down the button will quickly advance the hand, and pressing any button will make it stop.

7.Press the upper left button to complete the configuration.

Return to Timekeeping Mode, then the hands will advance to the current time and start to move.

Time Adjustment is completed

Time Adjustment is completed

Correct the hand home position

1.Hold down the upper left button for approximately 5 seconds until “H.SET” is displayed on the digital display.

After holding down the button for approximately 2 seconds “ADJ” will appear, but continue to hold down the button.

When the button is released while “H.SET” is displayed, “00” will flash on the upper display and the second hand will automatically move, so please wait until the hand has stopped.

2.If the second hand stops at any point other than 12 o’clock, use the lower right button (forward) and the upper right button (back) to align it with 12 o’clock.

Each press of the lower right button will advance the hand one step, and each press of the upper right button will go backward one step.

Holding down the button will quickly advance the hand, and pressing any button will make it stop.

3.Pressing the lower left button will switch to adjusting the hour and minute hands.

The hour and minute hands will move automatically, so please wait until the hands have stopped.

4.If the hour and minute hands stop at any point other than 12 o’clock, use the lower right button (forward) and the upper right button (back) to align them with 12 o’clock.

Each press of the lower right button will advance the hand one step, and each press of the upper right button will go backward one step.

The hour and minute hands will move at the same time.

Holding down the button will quickly advance the hands, and pressing any button will make them stop.

[Tip for adjusting the hands]

When advancing the hands, quickly pause them momentarily when they are near to 12 o’clock, and then set the hands to 12 o’clock using small increments.

5.Pressing the lower left button will switch to adjusting the mode dial hand.

The mode dial hand will move automatically, so please wait until the hand has stopped.

6.If the mode dial hand stops at any point other than 12 o’clock, use the lower right button (forward) and the upper right button (back) to align it with 12 o’clock.

Each press of the lower right button will advance the hand one step, and each press of the upper right button will go backward one step.

Holding down the button will quickly advance the hand, and pressing any button will make it stop.

7.Press the upper left button to complete the configuration.

Return to Timekeeping Mode, then the hands will advance to the current time and start to move.

Time Adjustment is completed