Time Adjustment
Operation procedure for time adjustment
Perform the operation in Timekeeping Mode
Pressing the lower left button will switch to Timekeeping Mode.
Each press of the lower left button will play a verification sound, and switch to a different mode.
Displays the time on the digital display
Pressing the lower right button will switch to the time display.
Each press of the lower right button will switch to a different display.
Are both the digital display and the hands set to the correct time?
Time Adjustment is completed
What is your issue?
Example: If the correct time and date is Monday, September 30, 2019,
10:10:00 pm
With the 12-hour format selected, the “P” indicator will appear in the afternoon.
- The digital display is not correct,
or the hands are also not correct - Only the hands are not correct
Check if the City Code Setting is set to the region (city) you are using the watch in
-
1.Hold down the upper left button for approximately 2 seconds until “ADJ” is displayed on the digital display.
-
If you continue to hold it down “H.SET” will display, and if you continue further it will return to Timekeeping Mode.
If you return to Timekeeping Mode, repeat this operation.
When you release the button after “ADJ” appears, the “Home Time City setting” will be displayed.
Is the City Code displayed on the digital display?
Check the Home City on the “City Code Table”.
If your city name is not there, please select a city from the same time zone.
City Code Table
|
City Code |
UTC Offset/GMT Differential |
City |
|---|---|---|
|
UTC |
0 |
|
|
LIS |
Lisbon |
|
|
LON |
London |
|
|
MAD |
+1 |
Madrid |
|
PAR |
Paris |
|
|
ROM |
Rome |
|
|
BER |
Berlin |
|
|
STO |
Stockholm |
|
|
ATH |
+2 |
Athens |
|
CAI |
Cairo |
|
|
JRS |
Jerusalem |
|
|
MOW |
+3 |
Moscow |
|
JED |
Jeddah |
|
|
THR |
+3.5 |
Tehran |
|
DXB |
+4 |
Dubai |
|
KBL |
+4.5 |
Kabul |
|
KHI |
+5 |
Karachi |
|
DEL |
+5.5 |
Delhi |
|
KTM |
+5.75 |
Kathmandu |
|
DAC |
+6 |
Dhaka |
|
RGN |
+6.5 |
Yangon |
|
BKK |
+7 |
Bangkok |
|
SIN |
+8 |
Singapore |
|
HKG |
Hong Kong |
|
|
BJS |
Beijing |
|
|
TPE |
Taipei |
|
City Code |
UTC Offset/GMT Differential |
City |
|---|---|---|
|
SEL |
+9 |
Seoul |
|
TYO |
Tokyo |
|
|
ADL |
+9.5 |
Adelaide |
|
GUM |
+10 |
Guam |
|
SYD |
Sydney |
|
|
NOU |
+11 |
Nouméa |
|
WLG |
+12 |
Wellington |
|
PPG |
-11 |
Pago Pago |
|
HNL |
-10 |
Honolulu |
|
ANC |
-9 |
Anchorage |
|
YVR |
-8 |
Vancouver |
|
LAX |
Los Angeles |
|
|
YEA |
-7 |
Edmonton |
|
DEN |
Denver |
|
|
MEX |
-6 |
Mexico City |
|
CHI |
Chicago |
|
|
NYC |
-5 |
New York |
|
SCL |
-4 |
Santiago |
|
YHZ |
Halifax |
|
|
YYT |
-3.5 |
St. John’s |
|
RIO |
-3 |
Rio De Janeiro |
|
FEN |
-2 |
Fernando de Noronha |
|
RAI |
-1 |
Praia |
This table was created in December 2010.
Check the Summer Time (DST) setting
-
1.Pressing the lower left button will switch to the “Summer Time (DST) setting”.
-
Each press of the lower left button will change the flashing part in the order of the chart above.
Is the Summer Time (DST) setting displayed on the digital display correct?
When the summer time (DST) setting is ON, time will be one hour ahead of Standard Time.
-
2.Press the upper left button to complete the configuration.
-
Is the digital display set to the correct time?
Are the hands correct?
Time Adjustment is completed
Correct the hand home position
-
1.Hold down the upper left button for approximately 5 seconds until “H.SET” is displayed on the digital display.
-
When the button is released while “H.SET” is displayed, “0:00” will flash on the digital display and the hour and minute hands will automatically move, so please wait until the hands have stopped.
After holding down the button for approximately 2 seconds “ADJ” will appear, but continue to hold down the button.
“H.SET” will display, and if you continue to hold down the button it will return to Timekeeping Mode.
If you return to Timekeeping Mode, repeat this operation.
-
2.If the hour and minute hands stop at any point other than 12 o’clock, use the lower right button (forward) and the upper right button (back) to align them with 12 o’clock.
-
Each press of the lower right button will advance the hand one step, and each press of the upper right button will go backward one step.
The hour and minute hands will move at the same time.
Holding down the button will quickly advance the hands, and pressing any button will make them stop.
Quickly advancing using the lower right (forward) button will make the minute hand rotate 12 times, and quickly advancing with the upper right button (back) will make the minute hand rotate once, and the hand will stop.
[Tip for adjusting the hands]
When advancing the hands, quickly pause them momentarily when they are near to 12 o’clock, and then set the hands to 12 o’clock using small increments.
-
3.Press the upper left button to complete the configuration.
-
Return to Timekeeping Mode, then the hands will advance to the current time and start to move.
When finished setting to the home position, check if the time shown by the hands in Timekeeping Mode and the time on the digital display match.
Time Adjustment is completed
Correct the time and date on the digital display
Set to the correct time (hours, minutes, seconds) and date (year, month, day).
-
1.Hold down the upper left button for approximately 2 seconds until “ADJ” is displayed on the digital display.
-
If you continue to hold it down “H.SET” will display, and if you continue further it will return to Timekeeping Mode.
If you return to Timekeeping Mode, repeat this operation.
When you release the button after “ADJ” appears, the “Home Time City setting” will be displayed.
-
2.Pressing the lower left button three times will switch to the “seconds” setting.
-
Each press of the lower left button will change the flashing part in the order of the chart above.
-
3.Press the lower right button and set the “seconds”.
-
Set the correct seconds based on a time signal service, etc.
-
4.Pressing the lower left button will switch to the “hour” setting.
-
With the 12-hour format selected, the “P” indicator will appear in the afternoon.
-
5.Press the lower right button (forward) and the upper right button (back) to set the correct “hour”.
-
Each press of the lower right button will advance one step, and each press of the upper right button will go backward one step.
Holding down the button will quickly advance the hours, and releasing the button will make it stop.
-
6.Pressing the lower left button will switch to the “minute” setting.
-
-
7.Press the lower right button (forward) and the upper right button (back) to set the correct “minutes”.
-
-
8.Pressing the lower left button will switch to the “year” setting.
-
-
9.Press the lower right button (forward) and upper right button (back) to set the correct “year”.
-
The “year” can be set between 2000 and 2099. When the “year, month and day” are set correctly, the day of the week will be automatically calculated.
The calendar is a fully automatic calendar that will automatically determine leap years along with the number of days in a month.
-
10.Pressing the lower left button will switch to the “month” setting.
-
-
11.Press the lower right button (forward) and the upper right button (back), and set the correct “month”.
-
-
12.Pressing the lower left button will switch to the “day” setting.
-
-
13.Press the lower right button (forward) and the upper right button (back) to set the correct “day”.
-
-
14.Press the upper left button to complete the configuration.
-
Are the hands correct?
Time Adjustment is completed
Correct the hand home position
-
1.Hold down the upper left button for approximately 5 seconds until “H.SET” is displayed on the digital display.
-
When the button is released while “H.SET” is displayed, “0:00” will flash on the digital display and the hour and minute hands will automatically move, so please wait until the hands have stopped.
After holding down the button for approximately 2 seconds “ADJ” will appear, but continue to hold down the button.
“H.SET” will display, and if you continue to hold down the button it will return to Timekeeping Mode.
If you return to Timekeeping Mode, repeat this operation. -
2.If the hour and minute hands stop at any point other than 12 o’clock, use the lower right button (forward) and the upper right button (back) to align them with 12 o’clock.
-
Each press of the lower right button will advance the hand one step, and each press of the upper right button will go backward one step.
The hour and minute hands will move at the same time.
Holding down the button will quickly advance the hands, and pressing any button will make them stop.
Quickly advancing using the lower right (forward) button will make the minute hand rotate 12 times, and quickly advancing with the upper right button (back) will make the minute hand rotate once, and the hand will stop.
[Tip for adjusting the hands]
When advancing the hands, quickly pause them momentarily when they are near to 12 o’clock, and then set the hands to 12 o’clock using small increments.
-
3.Press the upper left button to complete the configuration.
-
Return to Timekeeping Mode, then the hands will advance to the current time and start to move.
When finished setting to the home position, check if the time shown by the hands in Timekeeping Mode and the time on the digital display match.
Time Adjustment is completed
-
2.Pressing the lower right button will switch the DST setting.
-
Each press of the button will switch between “ON” and “OFF”.
-
3.Press the upper left button to complete the configuration.
-
Is the digital display set to the correct time?
Are the hands correct?
Time Adjustment is completed
Correct the hand home position
-
1.Hold down the upper left button for approximately 5 seconds until “H.SET” is displayed on the digital display.
-
When the button is released while “H.SET” is displayed, “0:00” will flash on the digital display and the hour and minute hands will automatically move, so please wait until the hands have stopped.
After holding down the button for approximately 2 seconds “ADJ” will appear, but continue to hold down the button.
“H.SET” will display, and if you continue to hold down the button it will return to Timekeeping Mode.
If you return to Timekeeping Mode, repeat this operation. -
2.If the hour and minute hands stop at any point other than 12 o’clock, use the lower right button (forward) and the upper right button (back) to align them with 12 o’clock.
-
Each press of the lower right button will advance the hand one step, and each press of the upper right button will go backward one step.
The hour and minute hands will move at the same time.
Holding down the button will quickly advance the hands, and pressing any button will make them stop.
Quickly advancing using the lower right (forward) button will make the minute hand rotate 12 times, and quickly advancing with the upper right button (back) will make the minute hand rotate once, and the hand will stop.
[Tip for adjusting the hands]
When advancing the hands, quickly pause them momentarily when they are near to 12 o’clock, and then set the hands to 12 o’clock using small increments.
-
3.Press the upper left button to complete the configuration.
-
Return to Timekeeping Mode, then the hands will advance to the current time and start to move.
When finished setting to the home position, check if the time shown by the hands in Timekeeping Mode and the time on the digital display match.
Time Adjustment is completed
Correct the time and date on the digital display
Set to the correct time (hours, minutes, seconds) and date (year, month, day).
-
1.Hold down the upper left button for approximately 2 seconds until “ADJ” is displayed on the digital display.
-
If you continue to hold it down “H.SET” will display, and if you continue further it will return to Timekeeping Mode.
If you return to Timekeeping Mode, repeat this operation.When you release the button after “ADJ” appears, the “Home Time City setting” will be displayed.
-
2.Pressing the lower left button three times will switch to the “seconds” setting.
-
Each press of the lower left button will change the flashing part in the order of the chart above.
-
3.Press the lower right button and set the “seconds”.
-
Set the correct seconds based on a time signal service, etc.
-
4.Pressing the lower left button will switch to the “hour” setting.
-
With the 12-hour format selected, the “P” indicator will appear in the afternoon.
-
5.Press the lower right button (forward) and the upper right button (back) to set the correct “hour”.
-
Each press of the lower right button will advance one step, and each press of the upper right button will go backward one step.
Holding down the button will quickly advance the hours, and releasing the button will make it stop.
-
6.Pressing the lower left button will switch to the “minute” setting.
-
-
7.Press the lower right button (forward) and the upper right button (back) to set the correct “minutes”.
-
-
8.Pressing the lower left button will switch to the “year” setting.
-
-
9.Press the lower right button (forward) and upper right button (back) to set the correct “year”.
-
The “year” can be set between 2000 and 2099. When the “year, month and day” are set correctly, the day of the week will be automatically calculated.
The calendar is a fully automatic calendar that will automatically determine leap years along with the number of days in a month.
-
10.Pressing the lower left button will switch to the “month” setting.
-
-
11.Press the lower right button (forward) and the upper right button (back), and set the correct “month”.
-
-
12.Pressing the lower left button will switch to the “day” setting.
-
-
13.Press the lower right button (forward) and the upper right button (back) to set the correct “day”.
-
-
14.Press the upper left button to complete the configuration.
-
Are the hands correct?
Time Adjustment is completed
Correct the hand home position
-
1.Hold down the upper left button for approximately 5 seconds until “H.SET” is displayed on the digital display.
-
When the button is released while “H.SET” is displayed, “0:00” will flash on the digital display and the hour and minute hands will automatically move, so please wait until the hands have stopped.
After holding down the button for approximately 2 seconds “ADJ” will appear, but continue to hold down the button.
“H.SET” will display, and if you continue to hold down the button it will return to Timekeeping Mode.
If you return to Timekeeping Mode, repeat this operation. -
2.If the hour and minute hands stop at any point other than 12 o’clock, use the lower right button (forward) and the upper right button (back) to align them with 12 o’clock.
-
Each press of the lower right button will advance the hand one step, and each press of the upper right button will go backward one step.
The hour and minute hands will move at the same time.
Holding down the button will quickly advance the hands, and pressing any button will make them stop.
Quickly advancing using the lower right (forward) button will make the minute hand rotate 12 times, and quickly advancing with the upper right button (back) will make the minute hand rotate once, and the hand will stop.
[Tip for adjusting the hands]
When advancing the hands, quickly pause them momentarily when they are near to 12 o’clock, and then set the hands to 12 o’clock using small increments.
-
3.Press the upper left button to complete the configuration.
-
Return to Timekeeping Mode, then the hands will advance to the current time and start to move.
When finished setting to the home position, check if the time shown by the hands in Timekeeping Mode and the time on the digital display match.
Time Adjustment is completed
Example: Changing the city code from “LON” (London) to “NYC” (New York).
-
2.Press the lower right button (forward) or the upper right button (back) until “NYC” is displayed on the digital display.
-
Each press of the lower right button will advance through the city codes, and each press of the upper right button will go backward through the city codes.
Holding down the button will quickly advance the city code, and releasing the button will make it stop.
City Code Table
|
City Code |
UTC Offset/GMT Differential |
City |
|---|---|---|
|
UTC |
0 |
|
|
LIS |
Lisbon |
|
|
LON |
London |
|
|
MAD |
+1 |
Madrid |
|
PAR |
Paris |
|
|
ROM |
Rome |
|
|
BER |
Berlin |
|
|
STO |
Stockholm |
|
|
ATH |
+2 |
Athens |
|
CAI |
Cairo |
|
|
JRS |
Jerusalem |
|
|
MOW |
+3 |
Moscow |
|
JED |
Jeddah |
|
|
THR |
+3.5 |
Tehran |
|
DXB |
+4 |
Dubai |
|
KBL |
+4.5 |
Kabul |
|
KHI |
+5 |
Karachi |
|
DEL |
+5.5 |
Delhi |
|
KTM |
+5.75 |
Kathmandu |
|
DAC |
+6 |
Dhaka |
|
RGN |
+6.5 |
Yangon |
|
BKK |
+7 |
Bangkok |
|
SIN |
+8 |
Singapore |
|
HKG |
Hong Kong |
|
|
BJS |
Beijing |
|
|
TPE |
Taipei |
|
City Code |
UTC Offset/GMT Differential |
City |
|---|---|---|
|
SEL |
+9 |
Seoul |
|
TYO |
Tokyo |
|
|
ADL |
+9.5 |
Adelaide |
|
GUM |
+10 |
Guam |
|
SYD |
Sydney |
|
|
NOU |
+11 |
Nouméa |
|
WLG |
+12 |
Wellington |
|
PPG |
-11 |
Pago Pago |
|
HNL |
-10 |
Honolulu |
|
ANC |
-9 |
Anchorage |
|
YVR |
-8 |
Vancouver |
|
LAX |
Los Angeles |
|
|
YEA |
-7 |
Edmonton |
|
DEN |
Denver |
|
|
MEX |
-6 |
Mexico City |
|
CHI |
Chicago |
|
|
NYC |
-5 |
New York |
|
SCL |
-4 |
Santiago |
|
YHZ |
Halifax |
|
|
YYT |
-3.5 |
St. John’s |
|
RIO |
-3 |
Rio De Janeiro |
|
FEN |
-2 |
Fernando de Noronha |
|
RAI |
-1 |
Praia |
This table was created in December 2010.
Check the Summer Time (DST) setting
-
1.Pressing the lower left button will switch to the “Summer Time (DST) setting”.
-
Each press of the lower left button will change the flashing part in the order of the chart above.
Is the Summer Time (DST) setting displayed on the digital display correct?
When the summer time (DST) setting is ON, time will be one hour ahead of Standard Time.
-
2.Press the upper left button to complete the configuration.
-
Is the digital display set to the correct time?
Are the hands correct?
Time Adjustment is completed
Correct the hand home position
-
1.Hold down the upper left button for approximately 5 seconds until “H.SET” is displayed on the digital display.
-
When the button is released while “H.SET” is displayed, “0:00” will flash on the digital display and the hour and minute hands will automatically move, so please wait until the hands have stopped.
After holding down the button for approximately 2 seconds “ADJ” will appear, but continue to hold down the button.
“H.SET” will display, and if you continue to hold down the button it will return to Timekeeping Mode.
If you return to Timekeeping Mode, repeat this operation. -
2.If the hour and minute hands stop at any point other than 12 o’clock, use the lower right button (forward) and the upper right button (back) to align them with 12 o’clock.
-
Each press of the lower right button will advance the hand one step, and each press of the upper right button will go backward one step.
The hour and minute hands will move at the same time.
Holding down the button will quickly advance the hands, and pressing any button will make them stop.
Quickly advancing using the lower right (forward) button will make the minute hand rotate 12 times, and quickly advancing with the upper right button (back) will make the minute hand rotate once, and the hand will stop.
[Tip for adjusting the hands]
When advancing the hands, quickly pause them momentarily when they are near to 12 o’clock, and then set the hands to 12 o’clock using small increments.
-
3.Press the upper left button to complete the configuration.
-
Return to Timekeeping Mode, then the hands will advance to the current time and start to move.
When finished setting to the home position, check if the time shown by the hands in Timekeeping Mode and the time on the digital display match.
Time Adjustment is completed
Correct the time and date on the digital display
Set to the correct time (hours, minutes, seconds) and date (year, month, day).
-
1.Hold down the upper left button for approximately 2 seconds until “ADJ” is displayed on the digital display.
-
If you continue to hold it down “H.SET” will display, and if you continue further it will return to Timekeeping Mode.
If you return to Timekeeping Mode, repeat this operation.When you release the button after “ADJ” appears, the “Home Time City setting” will be displayed.
-
2.Pressing the lower left button three times will switch to the “seconds” setting.
-
Each press of the lower left button will change the flashing part in the order of the chart above.
-
3.Press the lower right button and set the “seconds”.
-
Set the correct seconds based on a time signal service, etc.
-
4.Pressing the lower left button will switch to the “hour” setting.
-
With the 12-hour format selected, the “P” indicator will appear in the afternoon.
-
5.Press the lower right button (forward) and the upper right button (back) to set the correct “hour”.
-
Each press of the lower right button will advance one step, and each press of the upper right button will go backward one step.
Holding down the button will quickly advance the hours, and releasing the button will make it stop.
-
6.Pressing the lower left button will switch to the “minute” setting.
-
-
7.Press the lower right button (forward) and the upper right button (back) to set the correct “minutes”.
-
-
8.Pressing the lower left button will switch to the “year” setting.
-
-
9.Press the lower right button (forward) and upper right button (back) to set the correct “year”.
-
The “year” can be set between 2000 and 2099. When the “year, month and day” are set correctly, the day of the week will be automatically calculated.
The calendar is a fully automatic calendar that will automatically determine leap years along with the number of days in a month.
-
10.Pressing the lower left button will switch to the “month” setting.
-
-
11.Press the lower right button (forward) and the upper right button (back), and set the correct “month”.
-
-
12.Pressing the lower left button will switch to the “day” setting.
-
-
13.Press the lower right button (forward) and the upper right button (back) to set the correct “day”.
-
-
14.Press the upper left button to complete the configuration.
-
Are the hands correct?
Time Adjustment is completed
Correct the hand home position
-
1.Hold down the upper left button for approximately 5 seconds until “H.SET” is displayed on the digital display.
-
When the button is released while “H.SET” is displayed, “0:00” will flash on the digital display and the hour and minute hands will automatically move, so please wait until the hands have stopped.
After holding down the button for approximately 2 seconds “ADJ” will appear, but continue to hold down the button.
“H.SET” will display, and if you continue to hold down the button it will return to Timekeeping Mode.
If you return to Timekeeping Mode, repeat this operation. -
2.If the hour and minute hands stop at any point other than 12 o’clock, use the lower right button (forward) and the upper right button (back) to align them with 12 o’clock.
-
Each press of the lower right button will advance the hand one step, and each press of the upper right button will go backward one step.
The hour and minute hands will move at the same time.
Holding down the button will quickly advance the hands, and pressing any button will make them stop.
Quickly advancing using the lower right (forward) button will make the minute hand rotate 12 times, and quickly advancing with the upper right button (back) will make the minute hand rotate once, and the hand will stop.
[Tip for adjusting the hands]
When advancing the hands, quickly pause them momentarily when they are near to 12 o’clock, and then set the hands to 12 o’clock using small increments.
-
3.Press the upper left button to complete the configuration.
-
Return to Timekeeping Mode, then the hands will advance to the current time and start to move.
When finished setting to the home position, check if the time shown by the hands in Timekeeping Mode and the time on the digital display match.
Time Adjustment is completed
-
2.Pressing the lower right button will switch the DST setting.
-
Each press of the button will switch between “ON” and “OFF”.
-
3.Press the upper left button to complete the configuration.
-
Is the digital display set to the correct time?
Are the hands correct?
Time Adjustment is completed
Correct the hand home position
-
1.Hold down the upper left button for approximately 5 seconds until “H.SET” is displayed on the digital display.
-
When the button is released while “H.SET” is displayed, “0:00” will flash on the digital display and the hour and minute hands will automatically move, so please wait until the hands have stopped.
After holding down the button for approximately 2 seconds “ADJ” will appear, but continue to hold down the button.
“H.SET” will display, and if you continue to hold down the button it will return to Timekeeping Mode.
If you return to Timekeeping Mode, repeat this operation. -
2.If the hour and minute hands stop at any point other than 12 o’clock, use the lower right button (forward) and the upper right button (back) to align them with 12 o’clock.
-
Each press of the lower right button will advance the hand one step, and each press of the upper right button will go backward one step.
The hour and minute hands will move at the same time.
Holding down the button will quickly advance the hands, and pressing any button will make them stop.
Quickly advancing using the lower right (forward) button will make the minute hand rotate 12 times, and quickly advancing with the upper right button (back) will make the minute hand rotate once, and the hand will stop.
[Tip for adjusting the hands]
When advancing the hands, quickly pause them momentarily when they are near to 12 o’clock, and then set the hands to 12 o’clock using small increments.
-
3.Press the upper left button to complete the configuration.
-
Return to Timekeeping Mode, then the hands will advance to the current time and start to move.
When finished setting to the home position, check if the time shown by the hands in Timekeeping Mode and the time on the digital display match.
Time Adjustment is completed
Correct the time and date on the digital display
Set to the correct time (hours, minutes, seconds) and date (year, month, day).
-
1.Hold down the upper left button for approximately 2 seconds until “ADJ” is displayed on the digital display.
-
If you continue to hold it down “H.SET” will display, and if you continue further it will return to Timekeeping Mode.
If you return to Timekeeping Mode, repeat this operation.When you release the button after “ADJ” appears, the “Home Time City setting” will be displayed.
-
2.Pressing the lower left button three times will switch to the “seconds” setting.
-
Each press of the lower left button will change the flashing part in the order of the chart above.
-
3.Press the lower right button and set the “seconds”.
-
Set the correct seconds based on a time signal service, etc.
-
4.Pressing the lower left button will switch to the “hour” setting.
-
With the 12-hour format selected, the “P” indicator will appear in the afternoon.
-
5.Press the lower right button (forward) and the upper right button (back) to set the correct “hour”.
-
Each press of the lower right button will advance one step, and each press of the upper right button will go backward one step.
Holding down the button will quickly advance the hours, and releasing the button will make it stop.
-
6.Pressing the lower left button will switch to the “minute” setting.
-
-
7.Press the lower right button (forward) and the upper right button (back) to set the correct “minutes”.
-
-
8.Pressing the lower left button will switch to the “year” setting.
-
-
9.Press the lower right button (forward) and upper right button (back) to set the correct “year”.
-
The “year” can be set between 2000 and 2099. When the “year, month and day” are set correctly, the day of the week will be automatically calculated.
The calendar is a fully automatic calendar that will automatically determine leap years along with the number of days in a month.
-
10.Pressing the lower left button will switch to the “month” setting.
-
-
11.Press the lower right button (forward) and the upper right button (back), and set the correct “month”.
-
-
12.Pressing the lower left button will switch to the “day” setting.
-
-
13.Press the lower right button (forward) and the upper right button (back) to set the correct “day”.
-
-
14.Press the upper left button to complete the configuration.
-
Are the hands correct?
Time Adjustment is completed
Correct the hand home position
-
1.Hold down the upper left button for approximately 5 seconds until “H.SET” is displayed on the digital display.
-
When the button is released while “H.SET” is displayed, “0:00” will flash on the digital display and the hour and minute hands will automatically move, so please wait until the hands have stopped.
After holding down the button for approximately 2 seconds “ADJ” will appear, but continue to hold down the button.
“H.SET” will display, and if you continue to hold down the button it will return to Timekeeping Mode.
If you return to Timekeeping Mode, repeat this operation. -
2.If the hour and minute hands stop at any point other than 12 o’clock, use the lower right button (forward) and the upper right button (back) to align them with 12 o’clock.
-
Each press of the lower right button will advance the hand one step, and each press of the upper right button will go backward one step.
The hour and minute hands will move at the same time.
Holding down the button will quickly advance the hands, and pressing any button will make them stop.
Quickly advancing using the lower right (forward) button will make the minute hand rotate 12 times, and quickly advancing with the upper right button (back) will make the minute hand rotate once, and the hand will stop.
[Tip for adjusting the hands]
When advancing the hands, quickly pause them momentarily when they are near to 12 o’clock, and then set the hands to 12 o’clock using small increments.
-
3.Press the upper left button to complete the configuration.
-
Return to Timekeeping Mode, then the hands will advance to the current time and start to move.
When finished setting to the home position, check if the time shown by the hands in Timekeeping Mode and the time on the digital display match.
Time Adjustment is completed
Correct the hand home position
-
1.Hold down the upper left button for approximately 5 seconds until “H.SET” is displayed on the digital display.
-
When the button is released while “H.SET” is displayed, “0:00” will flash on the digital display and the hour and minute hands will automatically move, so please wait until the hands have stopped.
After holding down the button for approximately 2 seconds “ADJ” will appear, but continue to hold down the button.
“H.SET” will display, and if you continue to hold down the button it will return to Timekeeping Mode.
If you return to Timekeeping Mode, repeat this operation. -
2.If the hour and minute hands stop at any point other than 12 o’clock, use the lower right button (forward) and the upper right button (back) to align them with 12 o’clock.
-
Each press of the lower right button will advance the hand one step, and each press of the upper right button will go backward one step.
The hour and minute hands will move at the same time.
Holding down the button will quickly advance the hands, and pressing any button will make them stop.
Quickly advancing using the lower right (forward) button will make the minute hand rotate 12 times, and quickly advancing with the upper right button (back) will make the minute hand rotate once, and the hand will stop.
[Tip for adjusting the hands]
When advancing the hands, quickly pause them momentarily when they are near to 12 o’clock, and then set the hands to 12 o’clock using small increments.
-
3.Press the upper left button to complete the configuration.
-
Return to Timekeeping Mode, then the hands will advance to the current time and start to move.
When finished setting to the home position, check if the time shown by the hands in Timekeeping Mode and the time on the digital display match.