[Data] CT-S1000V Preset Lyric Tone Data - Version

CT-S1000V_0100_InitAllData.zip (Ver1.0.0/Jan. 20, 2022/14.1 MB)

Click the download file to download the software to your computer.
* Loading this file onto the CT-S1000V will reset all the user data, including the lyric tones.
* To restore the preset lyric tones one at a time, use the “Lyric Creator” app for smart devices.
* The user lyric tones numbered 101-150 will not be erased.(Ver. 1.01)
* Refer to the User’s Guide for the CT-S1000V for detailed information on the procedure for loading the DAL file onto the CT-S1000V and checking the version of the CT-S1000V.

1. Expand the downloaded zip file.
A folder is created. The folder contains the ”S1000V_INIT.DAL” DAL file.

2. Save the DAL file in the folder to the “MUSICDAT” folder on the USB flash drive.
If there is no “MUSICDAT” folder on the USB flash drive, either create one or complete the mount processing by plugging the USB flash drive into the CT-S1000V after it has been switched on.

3. Plug the USB flash drive into the CT-S1000V and switch the CT-S1000V on.

4. Press the MENU button.
The menu screen appears.

5. Press the < button below the LCD screen twice and then press the MEDIA button.
The media screen is displayed.

6. Press the LOAD button below the LCD screen, press the > button, and then press the ALL DATA button.
The DAL file selection screen is displayed.

7. Select ”S1000V_INIT” by turning the dial or by pressing the −/+ button below the LCD screen, and then press the SELECT button.
“Replace?” is displayed.

8. Press the YES button below the LCD screen.
The DAL file is loaded. Loading will take several minutes.

9. When “Complete” appears, press the OK button below the LCD screen.