[for Windows] CASIO Projector LOGO Loader - Version 1.0.0

Supported Models

XJ-A142/A147/A242/A247/A252/A257
XJ-M141/M146/M151/M156/M241/M246/M251/M256
XJ-UT310WN/UT331X/UT311WN/UT351W/UT351WN/UT312WN/UT352W/UT352WN
XJ-F10X/F100W/F20XN/F200WN/F210WN/F11X/F21XN/F101W/F211WN
XJ-S400U/S400UN/S400W/S400WN

Version Update History

2014.7.15: CASIO Projector LOGO Loader released.

CASIO Projector LOGO Loader is software for loading a user LOGO onto a CASIO projector.
Carefully read the information below before downloading the software.

Version Upgrade Details :

---

Minimum System Requirements

Operating System

Microsoft Windows^®10 (64/32bit)
Microsoft Windows^®8/8.1 (64/32bit)
Microsoft Windows^®7 SP1 (64/32bit)

Computer

IBM PC/AT or compatible that conforms to the conditions below.

•	Windows^®10, Windows^®8/8.1, Windows^®7 pre-installed
•	Pentium^®M 1.6GHz or higher CPU or CPU recommended for operating system being used
•	USB port

Display

Full-color display with resolution of at least 1024x768 that is compatible with Windows^®10, Windows^®8/8.1, Windows^®7

*	In addition to the above, the system should conform to the recommendations of Windows^®10, Windows^®8/8.1, Windows^®7
*	Normal operation may not be possible under certain system configurations.
*	Operation of this software is not supported on a Macintosh or on a computer running Mac OS.
*	Operation is not guaranteed on a computer running other operating system versions or an operating system that has been upgraded.
*	Operation of the software is in accordance with the precautions and other user documentation that accompany it.
*	For operating systems other than those shown under "Minimum System Requirements" above, see the "Operating System Compatibility".

To download CASIO Projector LOGO Loader

1.	Click the link under "Download File" below.
2.	On the file save dialog box that appears, specify the location where you want to save the download file and then click the [Save] button. This will download a self-extracting file to your computer.

To install CASIO Projector LOGO Loader

1.	First, install USB DRIVER for CASIO Projector.
2.	Unzip both CASIO Projector LOGO Loader and the logo header data for your projector model. Next, place both of the unzipped files into the same folder on your computer. There is no installer.

Conditions Governing Use

Be sure to observe the conditions below, which govern use of the Network Connection software (this Software). You are not allowed to use the Network Connection software unless you agree to observe these conditions governing use.

*	You are allowed to use this Software only with the CASIO projector models specified by "Supported Models" above.
*	You are not allowed to distribute this Software in any way.
*	You are not allowed to reverse engineer, disassemble, decompile, or otherwise reduce this Software to human-readable form.
*	You are not allowed to alter the copyright of this Software in any way.
*	CASIO COMPUTER CO., LTD. shall not be held responsible for any damages or loses suffered due to the use of this Software.
*	You assume all responsibility related to the downloading and use of this Software.