[for Windows] PJ Camera Software - Version 1.2

Aug. 2007

Supported Models

The software being offered here is an application for the Multifunctional Camera System. Be sure to read all the following information carefully before performing the download and using the software.

Version Upgrade details (ver.1.2)

1. Support for Windows Vista® (32-bit Editions)
2. Increase of Document Camera Mode and Scanner Mode photographic resolution from 4 megapixels to 10 megapixels (when YC-430 is the connected device)*
3. Increase of monitor image display resolution of VGA size to XGA/VGA size (full computer monitor screen display, when YC-430 is the connected device)*
4. Increase of maximum image zooming from 7.5X to 22X
5. Addition of function for converting images to monochrome negative
6. Faster thumbnail display in the PC Image Mode and Scanner Mode
7. Access by non-Administrator user privileges
* These functions are not available when the YC-400 is the connected device.

Minimum System Requirements

Microsoft Windows Vista®, XP, or 2000 Professional
Computer IBM PC/AT or compatible that conforms to the following conditions.
Windows Vista® XP, or 2000 Professional pre-installed
CPU: Pentium(R) III or higher or CPU recommended for operating system being used
USB port
Monitor Color monitor (16-bit color or greater, Full Color recommended) that supports connection to your computer and operation under Windows Vista®, XP, or 2000 Professional
Resolution 800 x 600 dots or higher
Input Device Mouse or compatible device that supports operation under Windows Vista®, XP, or 2000 Professional
* In addition to the above, the system should conform to the recommendations of Windows Vista®, XP, or 2000 Professional.
* Normal USB operation may not be possible under certain system configurations.
* Operation of this software is not supported on a Macintosh or on a computer running Mac OS.
* Operation is not guaranteed on a computer running other operating system versions or an operating system that has been upgraded.
* Operation of the software is in accordance with the precautions and other user documentation that accompany it.
* For operating systems other than those shown under "Minimum System Requirements" above, see the "Operating System Compatibility".

To download the upgrade

1. Click the YC400_430softup120E.exe download file name below.
2. On the file save dialog box that appears, specify the folder where you want it to be saved, and then click the Save button. This downloads a self-extracting file to your computer.

To install the upgrade

* If you have another version of PJ Camera Software installed on your computer, it is recommended that you go to the Windows control panel and use "Add/Remove Programs" to uninstall it before installing this version. If you install this version without first uninstalling the previous version, a "Delete" dialog box will appear the first time you run this version. If this happens, delete the old version before running the new version.
1. Quit all applications that are currently running on your computer.
2. On the Start menu, click Run.
3. Click the Browse button, and then use the dialog box that appears to select the file you downloaded (YC400_430softup120E.exe).
4. Click the Open button, which returns to the Run dialog box.
5. Click OK to start installation upgrade.
6. After installation of the upgrade is complete, follow the instructions that appear and restart your computer.

Terms and Conditions of Use

Use of this upgrade software is allowed subject to the following terms and conditions. Should you feel that you cannot observe any of the following terms and conditions for some reason, please do not use this upgrade software.
1. You agree to use this software only on the system indicated by the "Applicable system" item above.
2. You agree not to re-distribute this upgrade software in any form.
3. You agree not to attempt to modify, improve, reverse engineer, decompile or disassemble this upgrade software.
4. You are not allowed to change any of the copyright markings on this upgrade software in any way.
5. CASIO COMPUTER CO., LTD. shall not be held liable for any losses arising out of the use of this upgrade software.
6. You agree to download, install, and use this upgrade software at your own risk.
When connecting the YC-400 Document Camera, use of this software requires upgrading of the camera firmware to version 1.1.
Visit this page to upgrade your camera firmware to the required version.

Download Files

Upgrade Software YC400_430softup120E.exe (13,718KB)
When connecting the YC-400 Document Camera, be sure to visit this page for information about checking the firmware version of your camera.
Multifunctional Camera System Controller Software for Windows User's Guide (PDF:4.132MB)
Microsoft, Windows, Windows Media are registered trademarks of Microsoft Corporation in the United States and other countries.
Macintosh is registered trademarks of Apple Inc..