[Firmware] XJ-F21XN/F211WN/UT312WN/UT352WN/S400UN/S400WN - Version

Supported Models

The software covered here is firmware version update software for the CASIO DATA PROJECTOR.
Carefully read the explanation below to find out if you require it. If you do, use the instructions provided here to download and use the software. Carefully read the following information before downloading the software.

Improvements Provided by This Patch

Fixed minor bugs
Support for WPA/WPA2-EAP

Applicable Models

Note that installation of the firmware update cannot be undone. Once you install the firmware update, there is no way to restore your projector to its original firmware version.
* This is the newest version.
Be sure to update to this version from your current version.
Power failure or disconnecting the USB memory device being used for installation while installation is in progress will cause your projector to lose its Network Function. Take care that your projector is operating in a stable environment during installation.

Requirements for Installing This Update on Your projector

To install this firmware update on your projector, you will need to temporarily write it to a USB memory device's root directory (immediately under the drive). Because of this, you will need a USB memory device with at least 400 MB of free space available.
Contact your original retailer or authorized CASIO service center for more information.

User License Agreement Covering Update Software Download

* In order to download and use the update software, you must first read and agree to be bound by the terms and conditions of the End User Software Licensing Agreement (Agreement) below.
* If, after carefully reading the Agreement, you agree to be bound by its terms and conditions, click the [I agree] button to advance to the download procedure.
* Regardless of whether or not you actually do agree, by downloading this update software, you indicate your agreement to be bound by the terms and conditions of the Agreement and establish a contractual agreement between you and CASIO COMPUTER CO., LTD. (CASIO).
* If you do not agree with the terms and conditions of the Agreement, click [I do not agree] and do not download the update software.
End User Software Licensing Agreement
1) License
CASIO, as the owner of this Software and other intellectual asset rights, grants you the following non-exclusive, non-transferrable, copyright license subject to the terms of this Agreement.
1) You may install and use this Software on your CASIO DATA PROJECTOR.
2) You may make one copy of this Software on a USB memory device for the purpose of installing the software on your CASIO DATA PROJECTOR.
2) Prohibitions
1) Except as permitted by this Agreement, you may not copy this Software either in part or its entirety.
2) You may not modify, alter, adapt, reverse engineer, disassemble, decompile or otherwise attempt to derive the source code of the Software.
3) You may not resell, rend, lease, loan, or distribute this Software, or place the Software on a server or make it accessible by means of a network.
4) You may not sublicense or transfer this Software to a third party.
5) You may not use this Software for any unlawful purpose, or in any manner inconsistent with this Agreement.
3) Period of Agreement
1) This Agreement becomes binding as soon as you download the Software.
2) This Agreement becomes null and void when you destroy all of your copies of this Software.
3) CASIO may terminate this license at any time if you are in breach of the terms of this Agreement. Upon termination, you will immediately destroy the all of your copies of this Software.
4) Limitation of Liability
1) This Software is provided "as is," and CASIO makes no express warranty concerning the Software's ability to operate properly or to be free of defects, or concerning the correction of defects in the future, or the suitability of the Software functions for any particular purpose.
2) In no event shall CASIO be liable for any damages whatsoever (including, without limitation, damages for loss of profits, business interruption, loss of information) arising out of the use of or inability to use this software, even if CASIO has been advised of the possibility of such damages.
5) Other
1) Items not covered by the Agreement or items that require further negotiation shall be settled by mutual agreement between you and CASIO.
2) Any claim arising under or relating to this Agreement shall be governed by the laws of Japan.
3) Any dispute arising under or relating to this Agreement shall come under the jurisdiction of the Tokyo District Court.