[Firmware Update] EX-10 - Version 1.01

Apr. 2014

Supported Models

EX-10

Improvements Provided by This Update

V1.00  >>  V1.01
Improved Bracketing function operation
 

Applicable Users

EXILIM owners whose camera is still running Version 1.00 firmware.
  Important:
  If firmware update installation is interrupted due to low battery power, your camera will no longer be able to operate. Be sure to fully charge the camera's battery before starting the firmware update installation procedure. Note that you perform firmware update at your own risk.

To check your firmware version

On your EX-10 camera, hold down the [MENU] button as you press the [POWER ON/OFF] switch to turn on the camera. Keep [MENU] depressed until the version of your camera's firmware appears on the monitor screen.
1. If "VER 1.00" appears, you need to download this update software and install it on your camera.
2. If "VER 1.01" appears, it means that your camera already is running the latest firmware version, so you do not need to install this update.

Requirements for Installing This Update on Your Camera


To install this firmware update on your camera, you must copy it into the root directory (the top directory on the drive) of a memory card. Because of this, you need to have the USB cable (that comes bundled with the camera) on hand or a card slot available on your computer.

User License Agreement Covering Update Software Download

* In order to download and use the update software, you must first read and agree to be bound by the terms and conditions of the End User Software Licensing Agreement (Agreement) below.
* If, after carefully reading the Agreement, you agree to be bound by its terms and conditions, click the [I agree] button to advance to the download procedure.
* Regardless of whether or not you actually do agree, by downloading this update software, you indicate your agreement to be bound the terms and conditions of the Agreement and establish a contractual agreement between you and CASIO COMPUTER CO., LTD. (CASIO).
* If you do not agree with the terms and conditions of the Agreement, click [I do not agree] and do not download the update software.
End User Software Licensing Agreement
CASIO COMPUTER CO., LTD.
1 License
CASIO, as the owner of this Software and other intellectual asset rights, grants you the following non-exclusive, non-transferrable, copyright license subject to the terms of this Agreement.
1) You may install and use this Software on your CASIO EX-10 Digital Camera.
2) You may make one copy of this Software on a memory card for the purpose of installing the software on your EX-10 Digital Camera.
2 Prohibitions
1) Except as permitted by this Agreement, you may not copy this Software either in part or its entirety.
2) You may not modify, alter, adapt, reverse engineer, disassemble, decompile or otherwise attempt to derive the source code of the Software.
3) You may not resell, rend, lease, loan, or distribute this Software, or place the Software on a server or make it accessible by means of a network.
4) You may not sublicense or transfer this Software to a third party.
5) You may not use this Software for any unlawful purpose, or in any manner inconsistent with this Agreement.
3 Period of Agreement
1) This Agreement becomes binding as soon as you download the Software.
2) This Agreement becomes null and void when you destroy all of your copies of this Software.
3) CASIO may terminate this license at any time if you are in breach of the terms of this Agreement. Upon termination, you will immediately destroy the all of your copies of this Software.
4 Limitation of Liability
1) This Software is provided "as is," and CASIO makes no express warranty concerning the Software's ability to operate properly or to be free of defects, or concerning the correction of defects in the future, or the suitability of the Software functions for any particular purpose.
2) In no event shall CASIO be liable for any damages whatsoever (including, without limitation, damages for loss of profits, business interruption, loss of information) arising out of the use of or inability to use this software, even if CASIO has been adviced of the possibility of such damages.
5 Other
1) Items not covered by the Agreement or items that require further negotiation shall be settled by mutual agreement between you and CASIO.
2) Any claim arising under or relating to this Agreement shall be governed by the laws of Japan.
3) Any dispute arising under or relating to this Agreement shall come under the jurisdiction of the Tokyo District Court.
* Windows is a registered trademark of Microsoft Corporation.
* Macintosh is a registered trademark of Apple Inc.
* Other company and product(serial) names used herein may also be trademarks or registered trademarks of others.