[Firmware Update] QV-4000 - Version 1.02

QV-4000 Firmware Update Software...Version 1.02

Apr.2003

Improvements Provided by This Update

V1.01 - V1.02
Fix of a problem that caused key operations to fail when digital zoom is set to its maximum and white balance is configured for MWB (Manual White Balance).
V1.00-V1.01
Extends battery life when the monitor screen is off.
Fixes a problem that caused keys to become disabled during continuous shutter recording with manual exposure.
Improves shutter speed indication in the S mode.
Reduces residual images (red outlines) around subject in recorded images caused by strong light.

Applicable Users

This firmware update is intended for a QV-4000 camera that is currently running Version 1.00 - 1.01 firmware. Use the following procedure to check the current version of your camera's firmware.
     
Important:
Before starting firmware update make sure that the camera is loaded with a fresh set of batteries, or is powered by an A/C power supply Casio model AD-C620. Loss of power during update will crash the camera and make it inoperable. Do not turn power off untill the LCD screen displays message COMPLETE! Perform firmware update at your own risk.

To check the current firmware version

     
1. Load a Compact Flash card you normally use into your QV-4000.
2. While holding down the center of the QV-4000's control button, rotate the power/function switch to "PLAY".
3. Keep the control button depressed until the version of your camera's firmware appears on the monitor screen.
4. Check the firmware version number that appears on the monitor screen.
* If "Ver.1.00 - 1.01" appears, you need to download the version update and install it on your camera.
* If "Ver.1.02" appears, it means that your camera already is running the latest firmware version, so you do not need to install this update.

Requirements for Installing This Update on Your Camera

When installing this update on your camera, your computer needs to store the update software in the root directory (directly under the drive name) of a CompactFlash card. The update is then installed from the card. This means that you need a computer-camera USB cable or your computer must be equipped with a CompactFlash card slot.

User License Agreement Covering Update Software Download

* In order to download and use the update software, you must first read and agree to be bound by the terms and conditions of the End User Software Licensing Agreement (Agreement) below.
* If, after carefully reading the Agreement, you agree to be bound by its terms and conditions, click the [I agree] button to advance to the download procedure.
* Regardless of whether or not you actually do agree, by downloading this update software you indicate your agreement to be bound the terms and conditions of the Agreement and establish a contractual agreement between you and CASIO COMPUTER CO., LTD. (CASIO).
* If you do not agree with such terms and conditions, click [I do not agree] and do not download the update software.
End User Software Licensing Agreement
CASIO COMPUTER CO., LTD.
1 License
CASIO, as the owner of this Software and other intellectual asset rights, grants you the following non-exclusive, non-transferrable, copyright license subject to the terms of this Agreement.
1) You may install and use this Software on your CASIO QV-4000 Digital Camera.
2) You may make one copy of this Software on a CompactFlash card for the purpose of installing the software on your QV-4000 Digital Camera.
2 Prohibitions
1) Except as permitted by this Agreement, you may not copy this Software either in part or its entirety.
2) You may not modify, alter, adapt, reverse engineer, disassemble, decompile or otherwise attempt to derive the source code of the Software.
3) You may not resell, rend, lease, loan, or distribute this Software, or place the Software on a server or make it accessible by means of a network.
4) You may not sublicense or transfer this Software to a third party.
5) You may not use this Software for any unlawful purpose, or in any manner inconsistent with this Agreement.
3 Period of Agreement
1) This Agreement becomes binding as soon as you download the Software.
2) This Agreement becomes null and void when you destroy all of your copies of this Software.
3) CASIO may terminate this license at any time if you are in breach of the terms of this Agreement. Upon termination, you will immediately destroy the all of your copies of this Software.
4 Limitation of Liability
1) This Software is provided "as is," and CASIO makes no express warranty concerning the Software's ability to operate properly or to be free of defects, or concerning the correction of defects in the future, or the suitability of the Software functions for any particular purpose.
2) In no event shall CASIO be liable for any damages whatsoever (including, without limitation, damages for loss of profits, business interruption, loss of information) arising out of the use of or inability to use this software, even if CASIO has been adviced of the possibility of such damages.
5 Other
1) Items not covered by the Agreement or items that require further negotiation shall be settled by mutual agreement between you and CASIO.
2) Any claim arising under or relating to this Agreement shall be governed by the laws of Japan.
3) Any dispute arising under or relating to this Agreement shall come under the jurisdiction of the Tokyo District Court.
I agree I do not agree
* Windows is a registered trademark of Microsoft Corporation.
* Macintosh is a registered trademark of Apple Inc..
* Other company and product(serial) names used herein may also be trademarks or registered trademarks of others.