 |
|
|
|
Requirements for connecting USB to Windows 2000
|
|
1. |
CASIO USB cable. |
|
2. |
The Filter Driver obtainable from this web site. |
|
3. |
The standard USB driver installed on Windows 2000. |
|
|
|
|
|
|
|
Important: |
|
|
Note that only Administrators have the authority to install the USB driver. |
|
|
Downloading and installing the Windows 2000 USB Filter Driver
|
|
|
|
|
|
1. |
Read the conditions of use and then download by clicking on the "Qv2kux_e.exe" file below. When a dialog box for saving appears, select a folder for saving and click on the [Save] button. Once saved, double click on the "Qv2kux_e.exe" file to unzip. A "Qv2kux_e" folder which contains the Filter Driver( "Qv2kux.inf" file and "Qv2kux.sys" file)and "readme.txt" file will be created at the same location. |
|
2. |
Set the digital camera to "PLAY" mode. |
|
3. |
Connect the digital camera to the computer using the USB provided. |
|
4. |
[Found New Hardware Wizard] start up, and click on the [Next] button. |
|
5. |
Select [Search for a suitable driver for my device( recommended )] , and click on the [Next] button. |
|
6. |
Check [Specify a location], and click on the [Next] button. |
|
7. |
Click on the [Browse...] button. Select the "Qv2kux.inf " file inside the "Qv2kux_e" folder on the HDD , and then click on the [Open] button. |
|
8. |
Click on the [OK] button. |
|
9. |
Find "Driver" and then click on the [Next] button. |
|
10. |
Installation starts. When the [Completing the Found New Hardware Wizard] screen is displayed, click on the [Finish] button. |
|
11. |
When installation of the USB Filter Driver is completed, click on the [Hardware] icon on the task bar, disconnect the USB cable, and then re-start the computer. |
|
|
|
Reference
|
Uninstalling the Windows 2000 USB Filter Driver
|
|
|
|
|
|
1. |
Set the digital camera to "PLAY" mode. |
|
2. |
Connect the digital camera to the computer using the USB provided. |
|
3. |
Open [Device Manager].
[Start] - [Settings] - [Control Panel] - [System] - [Hardware] - [Device Manager] |
|
4. |
Open [Universal Serial Bus controllers] in [Device Manager]. Double-click [Universal Serial Bus controllers]. |
|
5. |
Delete the [CASIO DIGITAL CAMERA]. |
|
6. |
Delete the following 3 files. |
|
|
|
If Windows 2000 was upgraded from Windows 98: |
|
|
|
C:\windows\System32\Drivers\Qv2kux.sys
C:\Windows\Inf\Oem*.inf
C:\Windows\Inf\Oem*.pnf |
|
|
|
If Windows 2000 was pre-installed or newly installed, or was upgraded from Windows NT: |
|
|
|
C:\Winnt\System32\Drivers\Qv2kux.sys
C:\Winnt\Inf\Oem*.inf
C:\Winnt\Inf\Oem*.pnf |
|
|
|
Note that (*)in (Oem*.inf) and (Oem*.pnf) above means an undetermined figure ( 0,1,2... ). Namely, there may be not only one file for (Oem*.inf) and (Oem*.pnf) , for example : oem0.inf, oem1.inf, oem2.inf ... or oem0.pnf, oem1.pnf, oem2.pnf... One of the (Oem*.inf) files includes the message " CASIO DIGITAL CAMERA". Open all the corresponding files until you find the file containing this message. The (*) in the specific (Oem*.inf) and (Oem*.pnf) files should be replaced with the same figure. |
|
Conditions of Use
|
|
1. |
This file is provided to help owners of QV-8000SX/QV-2000UX/QV-2000UX/Ir digital cameras install the USB driver on a Windows 2000 computer. It cannot be used for other digital cameras. |
|
2. |
Regarding this file, the following acts are prohibited. |
|
|
1) |
Changing or modifying. |
|
|
2) |
Selling, distributing with other products, or incorporating into other products. |
|
|
3) |
Attaching to or printing in books or magazines, or distributing or uploading on networks without permission. |
|
WORLDWIDE