What should I keep in mind when selecting a location for the projector?
A18
This projector has intake vents and intake-exhaust vents on its sides, back and front.
Do not set up the projector in a way in which the intake vents (on the back)
and intake-exhaust vents (on the front and sides) are blocked. In addition,
be sure to follow the rules below.
- Allow at least 30cm between the projector and walls.
- Do not insert the projector into any space where air circulation is poor.
- Never cover the projector with a blanket or any similar item.
- Avoid placing the projector on a surface that is unstable or prone to vibration.
- Never place the projector on a carpet, blanket, towel, or other soft material during use.
Do not place the projector on a soft chair during use. Always select a hard,
flat surface in order to ensure that the intake and exhaust vents on the bottom
of the projector are not blocked.
- Do not locate objects that generate low levels of heat next to or under the projector.
- Do not substitute the lens cover with an object vulnerable to high temperatures.
- Use the projector within the specified operating temperature range (5 to 35 Celsius)
- In high-altitude locations where air is thin, select ""On"" for the projector's High Altitude setting.
