Specification
- Q26
- What should I keep in mind when selecting a location for the projector?
- A26
- This projector has intake vents, exhaust vents, and airflow vents on its sides and front.
Do not set up the projector in a way in which the intake/airflow vents (on the sides) and
exhaust vents (on the front) are blocked. In addition, be sure to follow the rules below.- Allow at least 30cm between the projector and walls. - Do not insert the projector into any space where air circulation is poor. - Never cover the projector with a blanket or any similar item. - Avoid placing the projector on a surface that is unstable or prone to vibration. - Never place the projector on a carpet, blanket, towel, or other soft material during use. -
Do not place the projector on a soft chair during use. Always select a hard,
flat surface in order to ensure that the intake and exhaust vents on the bottom of the projector are not blocked.- Do not locate objects that generate low levels of heat next to or under the projector. - Do not substitute the lens cover with an object vulnerable to high temperatures. -
Never stand the projector up on its side during use.
(Do not angle the projector upwards or downwards more than 30 degrees while in use.)- Use the projector within the specified operating temperature range (5 to 35 Celsius) - In high-altitude locations where air is thin, select "On" for the projector's High Altitude setting.