LABEL DESIGN MAKER (for Android)

Q3

The following error message appears: "Printer not found."

A3

Noise or some other problem may have caused wireless LAN communication to time out.

Use the printer's power key to turn power off and then back on again. Next, try establishing a wireless LAN connection again.

[In the Access Point Mode]
	•	If the printer is not turned on, your phone may connect with another access point or wireless LAN settings may otherwise be changed.
			On your phone, perform the following operation to check if it is connected with the printer: [Settings] - [Wi-Fi].
	•	The printer and phone may be too far away from each other.
			Move closer to the printer and try again.

[In the Client Mode ]
	•	The printer may be turned off.
			Turn the Printer back on again.
	•	The printer may not be connected with the wireless LAN network.
			Check whether the printer is connected with the applicable wireless LAN network.

If connection is still not possible after taking the above steps, perform the operation below.
	(1)	Turn off the wireless LAN router or access point, and the printer.
	(2)	Turn off your phone's Wi-Fi settings.
	(3)	Turn on the wireless LAN router or access point.
	(4)	Turn on the printer.
	(5)	Turn on your phone's Wi-Fi settings and re-connect.