How can I load
paper into my
HR-8 series
calculator?
A2
Slide off the upper cover of the calculator, and cut across the paper roll to form a clean end.
If you are mounting the roll externally (outside of the back of the calculator), then look for a slot in the
rear of the calculator, which will accept the paper. Feed the end of the paper through the rear slot, and
then into the internal feed slot, and hold the [FEED] key. After that, you can flip the arm back to mount
the roll and replace the upper cover.
If you want to place the roll inside of the calculator, then you need to feed from the bottom of the roll
into the internal feed slot, and hold the [FEED] key. After you are finished, replace the upper cover.
