Multi Camera Mode

Q3
How can I shoot using the Multi Image screen?
A3
You can use this screen to display images from the two cameras side by side (or above and below in the case of portrait orientation). In this view you can shoot with both cameras simultaneously or you can shoot individually with one camera.

Shooting Simultaneously with Both Cameras

You can use the operations below to shoot simultaneously with both cameras while viewing their images on the Multi Image screen.
• Pressing the controller shutter button causes both cameras to shoot snapshots simultaneously.
• Pressing the controller movie button starts movie recording on both cameras simultaneously. Press the movie button again to stop recording.

NOTE
• Simultaneous shooting with both cameras is not possible while either of the cameras is recording a movie.

Shooting with a Single Camera
You can use the operations below to shoot on either one of the cameras while viewing images of both cameras on the Multi Image screen.
• Pressing the shutter button of Camera 1 or Camera 2 shoots a snapshot with that camera only.
• Pressing the movie button of Camera 1 or Camera 2 starts a movie recording operation on that camera only. Press the movie button again to stop recording.

Interval Shooting with Two Cameras
Use the procedure below to perform an Interval Shooting operation with two cameras.

Procedure
1. Touch the Interval Shooting mode icon.
   This will displays the Interval Shooting setting screen.
2. Configure Interval Shooting settings as desired, and then touch "Start".
   This applies the settings to both cameras and starts simultaneous Interval Shooting with them.

NOTE
• Interval Shooting is automatically cancelled if either camera is unable to shoot for some reason.

Multi Image Screen Operations
• You cannot configure camera REC mode settings while the Multi Image screen is displayed.
  To configure such settings, touch the Single Image icon of camera1 or camera2 to display the Single Image screen of the camera whose REC    mode settings you want to configure, and then touch the REC Mode icon.
  After you are finished configuring settings, touch the Multi Image icon to return to Multi Image screen.
• You cannot change movie quality, or configure other REC menu settings while the Multi Image screen is displayed.
  To configure such settings, touch the Single Image icon of camera1 or camera2 to display the Single Image screen of the camera whose REC  menu settings you want to configure, and then touch “MENU”.
  After you are finished configuring settings, touch the Multi Image icon to return to Multi Image screen.
• You cannot perform zoom operations while the Multi Image screen is displayed.
  To perform such operations, touch the Single Image icon of camera1 or camera2 to display the Single Image screen of the camera whose image you want zoom, and then perform the zoom operation you want.
  After you are finished, touch the Multi Image icon to return to Multi Image screen with your zoom setting maintained.

How useful was this information?

SEND