Other Special-purpose Recording Features
- Q16
- Can Handsfree Mode settings or the location of the on-screen motion detection icon?
- A16
- Perform the procedures below.
To configure Handsfree Mode settings
1. In the REC mode, display "MENU".
2. Press the <left> key, use the <up> and <down> keys to select the "REC MENU" tab, and then press the <right> key.
3. Use the <up> and <down> keys to select "Handsfree" and then press [SET].
4. Configure Handsfree settings as desired.Setting Description Motion Shutter Specifies the camera operation that enters the Handsfree Mode.
Always: The camera always remains in the Handsfree Mode, regardless of whether or not the monitor screen is tilted.
180 degrees:The camera enters the Handsfree Mode when the monitor screen is tilted upwards 180 degrees.
Off: Handsfree Mode disabled.Timer Specifies the amount of time that should elapse until shooting starts after the camera detects movement.
Settings: 0.5 seconds, 1 second, 2 seconds, 10 seconds
To reposition the motion detection icon
1. In the REC mode, display "MENU".
2. Press the <left> key, use the <up> and <down> keys to select the "REC MENU" tab, and then press the <right> key.
3. Use the <up> and <down> keys to select "Motion Position" and then press [SET].
4. Press [RING] and then select the icon you want to reposition (start self-timer icon or preview icon).
5. Use the <up>, <down>, <left>, and <right> keys or the Control Dial to move the icon, and then press [SET].
NOTE
If "Motion Position" is assigned to the <left> and <right> keys, you can reposition the motion position icons with the <left> and <right> keys.