[for Windows] CASIO Projector Flash Loader - Version 1.0.0

Supported Models

XJ-A142/A147/A242/A247/A252/A257
XJ-M141/M146/M151/M156/M241/M246/M251/M256
XJ-UT310WN/UT331X/UT311WN/UT351W/UT351WN/UT312WN/UT352W/UT352WN
XJ-F10X/F100W/F20XN/F200WN/F210WN/F11X/F21XN/F101W/F211WN
XJ-S400U/S400UN/S400W/S400WN

Version Update History
(2015.3.11) CASIO Projector Flash Loader released.
CASIO Projector Flash Loader is software for updating the firmware of a CASIO Projector.
Carefully read the following information before downloading the software.

Version Upgrade Details :
---

Minimum System Requirements
Operating System Microsoft Windows®10 (64/32bit)
Microsoft Windows®8/8.1 (64/32bit)
Computer IBM PC/AT or compatible that conforms to the following conditions.
• Windows®10, Windows®8/8.1 pre-installed
• Pentium®M 1.6GHz or higher CPU or CPU recommended for operating system being used
• USB port
Display Full-color display with resolution of at least 1024x768 that is compatible with Windows®10, Windows®8/8.1
* In addition to the above, the system should conform to the recommendations of Windows®10, Windows®8/8.1
* Normal operation may not be possible under certain system configurations.
* Operation of this software is not supported on a Macintosh or on a computer running Mac OS.
* Operation is not guaranteed on a computer running other operating system versions or an operating system that has been upgraded.
* Operation of the software is in accordance with the precautions and other user documentation that accompany it.
* For operating systems other than those shown under "Minimum System Requirements" above, see the "Operating System Compatibility".

To download CASIO Projector Flash Loader
1) Click the link under "Download File" below.
2) On the file save dialog box that appears, specify the location where you want to save the download file and then click the [Save] button. This will download a self-extracting file to your computer.

To install CASIO Projector Flash Loader
1) First, install USB DRIVER for CASIO Projector.
USB DRIVER for CASIO Projector is also used by CASIO Projector LOGO Loader. If you have already installed CASIO Projector LOGO Loader on your computer, you do not need to download USB DRIVER for CASIO Projector again.
2) Unzip both CASIO Projector Flash Loader and the firmware data for your projector model. Next, place both of the unzipped files into the same folder on your computer.
Note that CASIO Projector Flash Loader does not have an installer. Simply unzip the file and place them in the same folder.

Precautions During Updating
* Using this software to update the projector firmware causes logo data to return to the default CASIO logo. If you want to change to a different (user) logo, use CASIO Projector LOGO Loader to transfer it to the projector.

Conditions Governing Use
Be sure to observe the following conditions that govern use of the Network Connection software (this Software).
You are not allowed to use the Network Connection software unless you agree to observe these conditions governing use.
1) You are allowed to use this Software only with the CASIO projector models specified by "Supported Models" above.
2) You are not allowed to distribute this Software in any way.
3) You are not allowed to reverse engineer, disassemble, decompile, or otherwise reduce the Software to human-readable form.
4) You are not allowed to alter the copyright of the Software in any way.
5) CASIO COMPUTER CO., LTD. shall not be held responsible for any damages or loses suffered due to the use of this Software.
6) You assume all responsibility related to the downloading and use of this Software.

Download Files
CASIO Projector Flash Loader(212KB)
USB DRIVER for CASIO Projector(3,330KB)
 
Firmware data
Update Information
(2021/6/24)
XJ-UT312WN/UT352WN
 Fixed a minor bug
(2020/7/20)
XJ-S400U/400UN/400W/400WN
 Fixed a minor bug
 
XJ-F11X ver.1.01.68 1,748KB
XJ-F101W ver.1.01.68 1,697KB
XJ-F21XN ver.1.01.68 1,782KB
XJ-F211WN ver.1.01.68 1,783KB
XJ-UT352W ver.1.01.62 1,768KB
XJ-UT312WN/UT352WN NEW ver.1.01.64 1,853KB
XJ-S400U ver.1.01.55 1,673KB
XJ-S400W ver.1.01.55 1,676KB
XJ-S400UN ver.1.01.55 1,673KB
XJ-S400WN ver.1.01.55 1,676KB
XJ-A Series(XGA)
 ver.1.00.53 1,476KB
XJ-A Series(WXGA) ver.1.00.53 1,475KB
XJ-M Series(XGA)
 ver.1.00.53 1,658KB
XJ-M Series(WXGA) ver.1.00.53 1,646KB
XJ-UT310WN ver.1.01.58 1,676KB
* For the User's Guide PDF file, click here and then download the "Firmware Update Guide" for the supported Models.