[for Windows] EZ-Converter PRO - Version 1.0

Nov. 2007

Supported Models

XJ-S35/S36/S46/S37/S47/S57/S38/S48/S58/S68
XJ-SC215
XJ-A135/A145/A235/A245
XJ-A145V/A155V/A245V/A255V
XJ-A146/A246/A256
XJ-M145/M155/M245/M255
XJ-ST145/ST155
XJ-H1650/H1750/H2650/H400XS/H400XN
YP-100
Version Update History
(2007.11.21) EZ-Converter PRO Version 1.0 released.
EZ-Converter PRO converts many of files that are printable on a computer to a format that can be projected by a CASIO projector. Carefully read the following information before downloading the software.
Note that when you download this software, you will need the number printer under the bar code on the back of the projector.

Minimum System Requirements

Operating System Microsoft Windows Vista®
Microsoft Windows®XP (SP2)
Microsoft Windows®2000 Professional (SP4)
Computer IBM PC/AT or compatible that conforms to the following conditions.
Windows Vista®/Windows®XP/2000 Professional pre-installed
Pentium®III 800MHz or higher CPU or CPU recommended for operating system being used
USB port
Display Full-color display with resolution of at least 800 x 600 that is compatible with Windows Vista®/Windows®XP/2000 Professional
Input Device Keyboard and Pointing Device (Mouse or compatible device that supports operation under Windows Vista®/Windows®XP/2000 Professional)
* In addition to the above, the system should conform to the recommendations of Windows Vista®/Windows®XP/2000 Professional
* Normal USB operation may not be possible under certain system configurations.
* Operation of this software is not supported on a Macintosh or on a computer running Mac OS.
* Operation is not guaranteed on a computer running other operating system versions or an operating system that has been upgraded.
* Operation of the software is in accordance with the precautions and other user documentation that accompany it.
* For operating systems other than those shown under "Minimum System Requirements" above, see the "Operating System Compatibility".

To download EZ-Converter PRO

1) Click the link under "Download File" below.
2) On the file save dialog box that appears, specify the location where you want to save the download file and then click the [Save] button. This will download a self-extracting file to your computer.

To install EZ-Converter PRO

1) Exit all other programs that are currently running on your computer.
2) From the Windows [Start] menu, click [Run].
3) Click the [Browse] button and select the file that you downloaded.
4) Click the [Open] button to return to the "Run" dialog box.
5) Click the [OK] button.
6) Follow the instructions that appear on the screen to install EZ-Converter PRO.

Conditions Governing Use

Be sure to observe the following conditions that govern use of the EZ-Converter PRO software (this Software).
You are not allowed to use the EZ-Converter PRO software unless you agree to observe these conditions governing use.
1) You are allowed to use this Software only with the CASIO projector models specified by "Applicable Models" above.
2) You are not allowed to distribute this Software in any way.
3) You are not allowed to reverse engineer, disassemble, decompile, or otherwise reduce the Software to human-readable form.
4) You are not allowed to alter the copyright of the Software in any way.
5) CASIO COMPUTER CO., LTD. shall not be held responsible for any damages or loses suffered due to the use of this Software.
6) You assume all responsibility related to the downloading and use of this Software.

Important!

This Software uses the print function of an application to convert files. This means that you will need to configure certain settings when converting images using each application.

Download File

ConverterPROSoftUp101.exe(3,540KB)
* For the User's Guide PDF file, click here and then download the "XJ-S36/S46USB Function Guide" for the XJ-S31/S36 or XJ-S41/S46.