Specification
- Q11
- What should I keep in mind when selecting a location for the projector?
- A11
- This projector has intake vents and intake-exhaust vents on its sides, back and front.
Do not set up the projector in a way in which the intake vents (on the back)
and intake-exhaust vents (on the front and sides) are blocked. In addition,
be sure to follow the rules below.- Allow at least 30cm between the projector and walls. - Do not insert the projector into any space where air circulation is poor. - Never cover the projector with a blanket or any similar item. - Avoid placing the projector on a surface that is unstable or prone to vibration. - Never place the projector on a carpet, blanket, towel, or other soft material during use. -
Do not place the projector on a soft chair during use. Always select a hard, flat surface in order to ensure that the intake and exhaust vents on the bottom of the projector are not blocked. - Do not locate objects that generate low levels of heat next to or under the projector. - Do not substitute the lens cover with an object vulnerable to high temperatures. - Never stand the projector up on its side during use. (Do not angle the projector upwards or downwards more than 30 degrees while in use.) - Use the projector within the specified operating temperature range (5 to 35 Celsius) - In high-altitude locations where air is thin, select "On" for the projector's High Altitude setting.