Specification
- Q6
- What should I keep in mind when selecting a location for the projector?
- A6
- The projector has intake and exhaust vents on its back, sides and front.
Take care to locate the projector in a way that its intake vents (sides and back) and exhaust vents (front) are not blocked. Make sure that you always observe the following guidelines.
- Allow at least 30cm between the projector and walls. - Do not insert the projector into any space where air circulation is poor. - Never cover the projector with a blanket or any similar item. - Avoid placing the projector on a surface that is unstable or prone to vibration. - Never place the projector on a carpet, blanket, towel, or other soft material during use. -
Do not place the projector on a soft chair during use. Always select a hard, flat surface in order to ensure that the intake and exhaust vents on the bottom of the projector are not blocked. - Do not locate objects that generate low levels of heat next to or under the projector. - Never stand the projector up on its side during use.(Do not angle the projector upwards or downwards more than 30 degrees while in use.) - Use the projector within the specified operating temperature range (5 to 35 Celsius). - In high-altitude locations where air is thin, select "On" for the projector's High Altitude setting.