Wireless LAN Functions
- Q5
- What can I do with "Quick Send"?
- A5
- You can send a snapshot or movie displayed in the PLAY mode to a smartphone.
• To use this function, you need to assign the Quick Send function to the front shutter button.
After sending a snapshot to a smartphone, you can then upload it to a social networking service.
To assign the Quick Send function to the front shutter button
1. On the camera, enter the PLAY mode and then press [MENU].
2. Press the <left> key, and then use the <up> and <down> keys to select the "PLAY MENU" tab. Next, press the <right> key.
3. Use the <up> and <down> keys to select "Front Shutter" and then press [SET].
4. Use the <up> and <down> keys to select "Quick Send" and then press [SET].
Procedure
1. On the smartphone, start up EXILIM Remote. In the upper right corner of the screen that appears, tap "Setting".
2. If you plan to upload the image to a social networking service after sending it to the smartphone, select "ON" for "Send to SNS". Otherwise, select "OFF"
3. Enter the PLAY mode.
Use the left and right keys to display the image you want to send to the smartphone.* Press the front shutter button.
* To send one image from a CS or bracketing group, press [SET] to start playback of the group images.
4. On your smartphone, start up the EXILIM Remote app.
This will establish a connection between your camera and the smartphone, and send the files to the smartphone.
• If the message "Connect your phone to the access point below." remains on the camera's monitor screen, change the smartphone's Wi-Fi settings so your camera is selected for connection.
• If you selected “ON” for "Send to SNS" in step 2 of this procedure:
A screen for uploading the image to a social networking service will appear on the smartphone screen after image send from the camera is complete.
The wireless LAN between the camera and smartphone will be disconnected at this time.
On the social networking service upload screen, select the service you want to upload to and then tap "send".
• If you selected "OFF" for "Send to SNS" in step 2 of this procedure:
The camera and smartphone will remain connected by wireless LAN after the image send operation is complete, so you can repeat steps 3 and 4 of this procedure to send another image. To break the connection, exit EXILIM Remote or turn off the camera.
NOTE
• To use any of these functions, you need to install the EXILIM Remote Version 2.0 app on your smartphone.
- Some functions are not supported by EXILIM Remote Version 1.
• You can specify the size of the image sent to the smartphone using "Resize before send".3M Images are converted to 3M size before being sent.
• If an original image is 3M size or smaller, it is sent without resizing.
• If an original image size is 3:2 or 16:9, its aspect ratio becomes 4:3.Original (Off) Images are sent in the pixels size they were originally recorded.
• You can use the smartphone apps below to view snapshots after sending them.
- iPhone: Camera Roll
- Android terminal: Gallery or another photo browser app
• Simultaneous send to multiple smartphones is not supported.
• Simultaneous send to the same smartphone by multiple cameras is not supported.