Power Requirements
- Q1
- How can I charge the camera's battery?
- A1
- You can use either of the two following methods to charge the camera's battery.
To charge with the USB-AC adaptor (Charging time: Approximately 1 hour 50minutes)
The back lamp indicates the current charging condition as described below.Lamp Status Description Lit Red Charging Flashing Red Abnormal ambient temperature, USB-AC adaptor problem, or battery problem Off Charging complete
To charge using a USB connection to a computer (Charging time: Approximately 2 hours 10 minutes)
The back lamp indicates the current charging condition as described below.
Lamp Status Description Lit Red,
(Lit/Flashing Amber)Charging Flashing Red Abnormal ambient temperature, charging taking abnormally long, or battery problem Off, (Lit Green) Charging complete • Statuses in parentheses are during USB communication.
- Charging time is affected by the type of computer being used and by connection conditions.
- Charging can be performed while USB data communication is in progress.
- Connect directly to a USB port what supplies a current of 500mA. For details about the power supply capacity of a computer's USB port, contact the manufacturer of the computer.
You also can use the optionally available special charger (BC-120L option) for charging.
NOTE
• Use only the USB-AC adaptor and USB cable specified in this manual for charging.
Use of any other type of devices may result in improper charging.
• Shooting and viewing images are not supported while charging is in progress.
Pressing the camera's power button while the USB-AC adapter is connected will turn on the camera and stop charging.
• If charging does not start, disconnect the USB cable and then reconnect it.